Amigurumi Santa Claus Free Pattern

Santa’s height in finished form is 36 cm to the top of the hat.

For knitting you need:

– knitting needles 3 mm,

– yarn of the right colors,

– filler. FEET, BODY, HEAD.

Right leg

Starting from the bottom edge of the leg and using black yarn, type

29 loops.

1st row: add in each loop = 58 loops. Beginning with

purl the back row to knit with stocking stitch 17 rows. *

We form the top of the foot:

1- Row: 6 knit, (2 knit together) 18 times, 16 knit = 40 loops.

2- Purl

3- Row: 4 knit, (2 knit together) 12 times, 12 knit = 28 loops.

** Next we knit 11 rows of hosiery.

Next row: 3 knit, (increase, 6 knit,) 3 times, increase, 3 knit, = 32

loops.

Track row: purl warp loops. Tear off the black thread and

attach red for pants. Knit 14 rows of hosiery

viscous. *** Tear off the thread and leave on the spare spoke.

Left leg

Do the same job until *

We form the top of the leg.

Next row: 16 knit, (2 knit together) 18 times, 6 knit = 40 loops.

Track row: purl warp loops.

Next row: 12 knit, (2knit together) 12 times, 4 knit = 28 loops. And now

do the same job as indicated for the right leg from **

before***.

Torso, head.

Now we will combine the details of the legs: for this we knit 32

stitches with knit left legs, then 32 stitches with spare knitting needles

right foot = 64 loops. Next, we knit 29 rows of stocking viscous.

We form the sides:

Next row: 12 knit, (2knit together) 5 times, 20 knit, (2knit together) 5 times,

12 knit = 54 loops. Next, hosiery 7 rows.

Next row: 12 knit, (2knit together) 3 times, 28 knit, (2 knit together) 3

times, 12 knit = 48 loops. Next, hosiery 5 rows.

Shaping the neck:

Trail row: (1knit, 2knit together) to the end of the row = 32 loops

Tear off the red thread and attach the flesh for the knit.

Hosiery 3 rows.

Head gain:

Add in each loop = 64 loops.

We knit 33-row hosiery.

We form the top of the head:

Track row: (2 knit, 2knit together) to the end = 48 loops.

Track row: (1 knit, 2 knit together) to the end.

Track row: purlanochka.

Track row: (2knit together) to the end of 16 loops.

Leave the long end of the thread, assemble the loops on the thread, but do not

to tighten.

Sew side seams on the feet, legs and body. Better to sew with

left side seam over the edge. You can insert cardboard into the legs

like tracks. (I did not insert, because without cardboard the legs are more like

on boots). Tightly stuff the toy through the non-wired part

torso.

I stuffed over my head, because. then the outer seam will be

subsequently under the hood and it will not be visible.

After everything is stitched and stuffed, you need to form a neck.

With a double thread of flesh-colored thread through each needle

loop and tighten and tighten the knot.

We do everything carefully so that no ends of the thread and knots are not

was seen. The toy must be equally carefully made

both front and rear. Next, embroider the eyes, the mouth.

Eyes

Mark the position of the eyes with pins, placing them at 20

rows above the incremental row for the head and leaving 4 loops

between the pins.

Black yarn embroider eyes like this:

– stretch the needle to one marked location of the eye,

pull the needle through the knito 2 rows below the first position,

pull back to the first position, do 4 more stitches,

fasten the thread. Embroider the second eye.

I still made eyebrows.

NOSE

Using flesh yarn, dial 5 loops and knit one

purl

Next row: increase in each loop = 10 loops

Starting with the purlanke knit 7 rows.

Track row: (2knit together) = 5 loops. Loop and fasten the hinges.

Pokraste turned out a piece of red pencil.

Using the end of the thread, collect the loops in a circle. Stuff and Loops

pull off. Sew the resulting ball into place,

focusing on the drawing.

HANDS (2 identical parts)

Start from the end of the hand and use flesh color to dial 12

loops.

Track row: purl

Next row: 24 loops added to each loop

Starting with the purl of the knit, knit in 11 rows.

Next row: 7 knit, (increase, 2knit together) 4 times, 5 knit = 28 loops.

Tear off the body thread and attach the red one for the sleeve.

Starting with a purl of 25 rows, knit

viscous.

Form the top of the sleeve:

Reduce one loop at the beginning of the next and all

subsequent rows until 6 stitches remain.

Sew the sleeve over the edge of the left side with a seam, turn on

right side, fill with filler. Hands not yet

to sew, until the hem of the jacket is sewn.

Then sew open edges of the hands to the sides of the jacket 1 cm lower

the edges of the neck.

SLEEVE CUFF (2 parts)

Using white yarn, dial 30 loops. Beginning with

purl the back row knit 7 rows of garter stitch. Hinges

to close.

Stitch the ends of the row of each cuff together on the left side.

Turn to the right. Sew cuffs around the bottom

the edges of the sleeves.

BEARD

The inside of the beard

Start knitting from the bottom edge and dial 12 loops. All over

the length of the beard knit with a garter stitch. Pay attention: 1st

The row is the right side of the part.

Next row: add at the beginning of the first and subsequent rows to

as long as there are 42 stitches on the spoke.

Shawl-13 rows. *

Hinges close

main part

Do the same work as with the inside before *

Mark each end of the last row with colored thread.

Knit with a garter stitch 2 rows.

Next row: 8 knit, knit turn, knit with a garter stitch 13

rows only on these 8 loops. Hinges to close. Join

white yarn to the remaining 34 loops and close the center 26

loops. Knit the remaining 8 stitches with knit stitches. Handkerchief

knit 13 rows and close the stitches.

Connect the inside and outside of the beard with the right

sides out. The inner part of the db at the level marked

colored threads on the main part of the beard. Sew the edges together

lightly fill with stuffing. Attach a beard with pins to

knitu so that the closed loops of the main part of the beard are

under the nose. Sew a beard to a knit.

Mustache (2 parts)

White yarn dial 6 loops. Knit a garter stitch

adding one loop at the beginning of the first and the next

row until 16 loops appear on the spoke.

Next row: Reduce one loop at the end of the next and

subsequent rows until 2

loops. Loop and fasten the hinges.

Sew along the edges of the ends of the row of each piece together. Make

front seam stitching both mustaches together. Sew a mustache to a knit so

so that the central seam is under the nose. Sew a mustache to

beard, knit, focusing on the picture.

HAT

Using white yarn dial 82 loops and knit hosiery

viscous 7 rows, starting with the purl number. Interrupt white

thread and then knit red thread 24 rows.

We form the top of the cap

1st row: 1 knit, (2 together knit, 14 knit) to the last loop, 1 knit

= 77 loops

2nd row and all even rows – purlano.

3rd row: 1 Knit, (2 vm. Knit., 13 Knit.) – repeat until

1 loop will remain and knit it. – it turns out 72 loops.

5th row: 1 Knit, (2 cm Knit., 12 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 67 loops.

7th row: 1 Knit, (2 cm Knit., 11 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 62 loops.

9th row: 1 Knit, (2 kn.Knit., 10 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 57 loops.

11th row: 1 Knit, (2 vm. Knit., 9 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 52 loops.

13th row: 1 Knit, (2 vm. Knit., 8 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 47 loops.

15th row: 1 Knit, (2 vm. Knit., 7 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 42 loops.

Hosiery 3 rows.

Next row: 1 Knit, (2 knm., 6 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 37 loops.

Hosiery 3 rows.

Next row: 1 Knit, (2 VM Knit., 5 Knit.) – Repeat until

1 loop will not remain and knit it. – it turns out 32 loops.

Hosiery 5 rows.

Next row: 1 Knit, (2 kn.Kit., 4 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 27 loops.

Hosiery 5 rows.

Next row: 1 Knit, (2 kn.Knit., 3 Knit.) – repeat until

1 loop will not remain and knit it. – it turns out 22 loops.

Hosiery 30 rows.

Next row: (2 vm Purl.) – repeat to the end of the row – get 11

loops.

Change red yarn to white for a pompom on a cap.

Next row: From each loop, knit 2 knit. – it turns out 22

loops.

Starting with Knit. we knit a row of hosiery knitting 12 rows.

Next row: (2 cm. Knit.) – repeat to the end of the row – it turns 11

loops. Pull the thread through the remaining loops and tighten it tightly,

to fix.

Sew together over the edge the ends of all rows of knitted knit. from

bottom edge. Connect all other ends of the rows. Turn on

knitŠ¾. Fill the pompom, gather the last row in a circle

knitted with red thread over the pompom. Pull tightly and

fasten the thread. Fill a very slightly narrow part at the top

cap. Fold up to the knit side of the hood, edge

all ranks related knit.

Place the cap on the head with a seam in the back in the center, only

above the neck. The front cap should be above the eyes. Bend

down edge, from rows knitted in all rows knit

loops. Sew the cap to the head through the last row

knitted in stocking viscous white yarn. Bend again

up the edge of the rows knitted in all rows of Knit. and

lock the set edge to the last row of knitted

hosiery viscous white thread. Tie oak leaves and berries (

description below) and sew as decoration on Santa hat.

Bend the narrow part of the cap and sew it to one of the side

sides of the head.

Upper boot trim for Santa

(2 parts)

White yarn dial 40 loops.

We knit 7 rows with knit stitches.

Close the loop.

Arrange each detail in a circle at the top of each boot

and sew together the ends of the rows from the back. Sew on

typed and closed edges to the boots.

The bottom of Santa’s jacket.

We start from the bottom edge, we collect 96 loops with white yarn.

We knit 8 rows with knit stitches.

Starting with the purl number, we knit hosiery 6 rows.

We cut off the white yarn and attach the red, knit

hosiery 15 rows.

Decrease for the waist

Next row: (2 knit, 2 vm.knit) – repeat to the end of the row,

it turns out 72 loops.

Now change the red yarn to black for the belt.

Purl warp loops next 2 rows.

Starting with purl. a series of stocking viscous 6 rows.

Close the loop.

Sew together the ends of the rows, then turn them on a knit

side.

Fold up the border, from all the rows of knit., To

knit the side of the part and sew the hem around

the last row knitted with white yarn, hosiery.

Place the part on Santa’s torso so that the seam is at the back

in the center. Pin the closed edge to the body, 6 rows

below the first side, forming a row on the body. Sew on

closed edge in place as attached.

Clasp

Take the yellow yarn in two folds and collect 28 loops.

Break one thread and close the loops. Take the yarn in one

addition, sew together the ends of the rows. Sew in front on

belt.

Now you can sew Santa’s hands.

Oak leaves. (for Santa and for Mrs. Klaus)

(do two)

Green thread to dial 16 loops.

1st row: 7 purl, add a loop in the next 2 loops, 7 purl –

it turns out 18 loops.

1 row knit.

Finished the top of the sheet, and proceed to the edge of the picot

sheet:

Next row: 1 knit, (double crochet, 2 vm.knit) – repeat 8 times, 1 knit.

Starting from knit.ryad, stocking 2 rows.

Next row: 7 knit, (2 vm. Knit) – repeat 2 times, 7 knit.-

it turns 16 loops.

Close the loop.

Fold the sheet with a pico edge on the knit side, stocking

out. Sew over the edge of the dialed and closed loops onto

bottom side of the sheet. Gather the ends of the row tightly and secure.

Holly berries.

(do three)

Red thread tightly dial 12 loops. Starting with purl

row, hosiery 2 rows. Close the loop tightly.

Firmly roll the knit side of the hosiery out

a strip from the beginning of the typed edge to the end of the typed edge.

Sew over the edge of the ends of the rows into place. Now collect the thread

around the outer edge from one end of the rolled shape, strongly

pull and fasten. Repeat from the other end.

Santa’s bag.

Start at the top edge of the brown yarn to dial 32 loops.

Knit all rows knit – 4 rows.

Starting with knit. row, continue hosiery and knit until

the part will not become 24 cm in size, the last row should be

knitted.

Knit all rows knit – 4 rows.

Close the loop.

Bend the strip, connecting together the typed and closed edges.

Sew together the ends of the rows on each side. Turn on

knitŠ¾.

Make a separate twisted cord at 46cm, matching the color of the bag.

Pass it through the bound singing at the top of the bag, only

below all the knit stitches.

Tie the ends together.

Candy cane.

It will take a regular plastic drinking straw about

3mm. In diameter.

White yarn dial 22 loops. Starting with purl. a number of hosiery

viscous – 4 rows. Close the loop.

Cut 8cm from the straw. Knit stitches on knit stitch

over the edge, the typed and closed edges of the connected strip,

investing 8cm. a straw, how to sew.

SANTA is ready!