Amigurumi Little Funny Bear Free Crochet Pattern
Translation: Koreneva Irina
Little funny
bears love
travel and
hug, will
best friends
To you and your children.
Toy Height –
about 23 cm in height.
Necessary
materials
– Bravo Yarn
Schachenmayr – Bravo Schachenmeier Composition – 100% Polyacryl (50 gr. / 133 m.)
You can take inexpensive Karachaevsk yarn in
tangles (50 gr. / 125 m.):
primary color – beige (light brown)
white – for eyes – 50 gr.
Black – for the nose – 50 gr.
light pink (white) – for inserts
on paws – 50 gr.
yellow and green for one hat – 50 each
column
dark pink and light pink for the second
hats – 50 gr.
Hook size – 3.5 mm
Eyes on a secure mount – 8 mm.
Decorative buttons for the navel – 8-10 mm.
Filler
Legend:
Sc – single crochet
İnc – increase
Dec – decrease
Head and body (fit in one piece)
We knit with beige yarn:
1 row: 6 sc into magic ring (6)
2 row: increase x 6 (12)
3 row: (sc, increase) x 6 (18)
4 row: (2 sc, increase) x 6 (24)
5 row: (3 sc, increase) x 6 (30)
6 row: (4 sc, increase) x 6 (36)
7 row: (5 sc, increase) x 6 (42)
8 row: (6 sc, increase) x 6 (48)
9-13 rows: 5 sc rows in each loop (48 loops)
14 row: (6 sc, decrease) x 6 (42)
15 row: (5 sc, decrease) x 6 (36)
16 row: 20 increments, (30 sc, increase) x 4 (60 loops)
17-23 rows: 7 rows of sc in each loop (60 loops)
24 row: 20 decreases, (2 sc, decrease) x4, 4 sc (36 loops)
25 row: (4 sc, decrease) x 6 (30)
26 row: (3 sc, decrease) x 6 (24)
27 row: (2 sc, decrease) x 6 (18)
Stuff your head with filler.
Then the body begins, do not break the thread, continue knitting:
28 row: (1 sc, decrease) x 6 (12)
29 row: 12 increase(24 loops)
30 row: sc in each loop (24 loops)
31 row: (1 sc, increase) x 12 (36 loops)
32 row: (5 sc, increase) x 6 (42)
33 row: (6 sc, increase) x 6 (48)
36-40 rows: 5 rows of sc in each loop (48 loops)
41 row: (6 sc, decrease) x 6 (42)
42 row: (5 sc, decrease) x 6 (36)
43 row: (4 sc, decrease) x 6 (30)
44 row: (3 sc, decrease) x 6 (24)
45 row: (2 sc, decrease) x 6 (18)
Fill the body with filler.
46 row: (1 sc, decrease) x 6 (12)
47 row: (decrease) x 6 (12)
Fasten and hide the thread.
Eyes (one piece)
Knit with white yarn:
1 row: 6 sc into magic ring (6)
2 row: increase x 6 (12)
3 row: (sc, increase) x 6 (18)
4 row: sc in each loop (18)
5 row: (4 sc, decrease) x3 (15 loops)
6 row: (3 sc, decrease) x3 (12 loops)
Fill the part slightly with a filler, fold in half and knit for both
walls 6 sc.
Sew eyes to the head, placing them in the center, higher from the muzzle,
previously secured with pins.
Nose (one piece)
Knit with black yarn:
1 row: Dial a chain of 4 ch
2 row: from the second loop from the hook we knit 2 sc on one side of the chain, 3
sc to the outer loop, unfold the knitting and knit on the other side
chains 1 sc, increase (8 loops)
3-4 rows: 8 sc
Fasten the thread and leave a long end for sewing to the head and
eye design
Muzzle decoration
Sew the nose to the head in the center right under the eyes
Insert the needle with the thread in the middle above the nose and bring out the center above the eyes
so that the thread passes behind the patch.
Reinsert the needle with the thread in the middle above the nose, this time so that the thread
passed from above the eyes right in the center. Make a little tightening and
fasten the thread, hide the end.
Sew on bead eyes 8 mm.
Hands (two parts)
We start with white or light pink yarn:
1 row: 5 sc in magic ring
2 row: 5 increase(10 loops)
Change thread to basic beige
color:
3-5 row: 3 rows sc unchanged (10
loops)
6 row: 2 decreases, 1 sc, 2 decreases, 1 sc (6
loops)
7-18 rows: 12 sc rows in each loop (6 loops)
Fasten the thread, leave a long end for sewing to the body. Stuff
filler parts.
Sew hands to the body on both sides.
Legs (two parts)
We start with white or light pink yarn:
1 row: Dial a chain of 4 ch
2 row: from the second loop from the hook we knit 2 sc on one side of the chain, 3
sc to the outer loop, unfold the knitting and knit on the other side
chains 1 sc, increase (8 loops)
3 row: increase, 1 sc, 3 increases, 1 sc, 2 increases (14 sc)
Change the thread to the main beige color:
4 row: 1 sc, increase, 1 sc, (1 sc, increase) x3, 1 sc, (1sc, increase) * 2
(20 loops)
5-7 rows: 3 rows sc in each loop (20 loops)
8 row: 4 sc, 5 decreases, 6 sc (15 loops)
We stuff the legs with filler.
9 row: 1 decrease, 1 sc, 3 decreases, 2 sc, 2 decreases (9)
10-16 rows: 7 sc rows in each loop (9 loops).
Fill the legs with filler, fasten the thread and leave a long end for
sewing on. Sew legs to the body as shown.
Tail
We knit the main beige yarn
colors:
1 row: 6 sc in magic ring
2 row: 6 increase(12 loops)
3-4 rows: sc in each loop (12 loops)
5 row: 6 decreases (6 loops)
Fill the tail with filler, Fasten
thread leave a long end for
sewing on.
Designate a place for tail sewing.
Designate a place for sewing a button on the navel.
Insert the needle into the place where the tail will be attached, bring to the place where it will be
fasten the navel. Sew a decorative button on the navel. Bring out the needle from behind
through the body and make a slight navel tightening. Fasten the thread.
Sew on the tail.
Ears (2 parts)
We knit the main beige yarn
colors:
1 row: 6 sc in magic ring
2 row: 6 increase(12 loops)
3-7 rows: 5 sc rows in each loop (12
loops)
Fold your ear in half and knit 6 sc per
both walls. Fold your ear in half and
to stitch.
Do not sew ears yet!
Yellow cap:
We start with green yarn:
1 row: 6 sc in magic ring
2 row: 6 increase(12 loops)
3-4 rows: 2 rows sc in each loop (12 loops)
5 row: (1 sc, increase) x6 (18 loops)
6 row: sc in each loop (18 loops)
Change the yarn to yellow:
7-8 rows: 2 rows sc in each loop (18 loops)
9 row: (2 sc, increase) x6 (24 loops)
Change the yarn to green:
10-11 rows: 2 rows sc in each loop (24 loops)
12 row: (3 sc, increase) x6 (30 loops)
Change the yarn to yellow:
13-15 rows: 3 rows sc in each loop (30 loops)
Change the yarn to green:
16 row: (4 sc, increase) x6 (36 loops)
17-18 rows: 2 rows sc in each loop (36 loops)
Change the yarn to yellow:
19 row: (5 sc, increase) x6 (42 loops)
20-21 rows: 2 sc rows in each loop (42 loops)
Change the yarn to green:
22 row: (6 sc, increase) x6 (48 loops)
23-24 rows: 2 rows sc in each loop (48 loops)
Change the yarn to yellow:
25 row: (7 sc, increase) x6 (54 loops)
26-27 rows: 2 sc rows in each loop (54 loops)
Change the yarn to green:
28 row: (17sc, increase) x3 (57 loops)
29-30 rows: 2 sc rows in each loop (57 loops)
Change the yarn to yellow:
31-33 rows: 3 sc rows in each loop (57 loops)
Change the yarn to green:
34-36 rows: 3 sc rows in each loop (57 loops)
Change the yarn to yellow:
37-39 rows: 3 sc rows in each loop (57 loops)
Change the yarn to green:
40-42 rows: 3 sc rows in each loop (57 loops)
Change the yarn to yellow:
43 row: sc in each loop (57 loops)
44 row: 25 sc, 3 ch, 3 loops 43 rows skipped, 25 sc, 3 ch, 3 loops 43
skip the row, 1 sc (57 loops) – in this row there will be holes under the ears
45-47 rows: 3 sc rows in each loop (57 loops)
Fasten and hide the thread.
Sew a pompom to the end of the cap.
Yellow hat pompom
Knit yellow yarn:
1 row: 6 sc in magic ring
2 row: 6 increase(12 loops)
3 row: (1 sc, increase) x6 (18 loops)
4-7 rows: 4 rows sc in each loop (18
loops)
8 row: (1 sc, decrease) x6 (12 loops)
Fill the pompom with filler
9 row: 6 decreases (6 loops)
Fasten the thread, leave a long end for sewing on the cap
Put the cap on the bear’s head
On the holes for the ears on the cap, mark the places of attachment of the ears to the head
Remove cap and sew on ears.