Amigurumi Confused Teddy Bear Free Crochet Pattern
PLUSH COMPANY.
This description is for personal use only.
Forbidden to sell descriptions.
When publishing finished works, it is advisable to indicate
the author of the description.
The company consists of three pussies friends.
They are connected according to one description. But only from different yarns and decoration
different faces.
Robert – the muzzle and nose are rolled, knitted from wool mixture,
designed for knitting socks, but she was so well pushed that the bear
It turned out so wonderful.
Plump yarn 150m in 100g, hook No. 1.75, bear height 28cm.
With such a thickness of yarn, 1.5 hanks leave (approximately, maybe even
less but more than 1 skein)
Murzilka – the nose is molded from plastic, it can be replaced with a button
or find a suitable ready-made nose, there are many options!
It is crocheted of yarn Adelia Valerie, 146m in 100g, hook number 1.5, height 23cm.
Grabs one hank
Natalya Brutskaya
Crochet iris and nose, yarn Cotton grass, 220m in 100g,
hook No. 1,5, height 19 cm. About half a skein.
The bears of the feet made of finishing yarn. If there is not enough basic yarn, then
You can also tie the ears and trim. Still, everyone has different knitting,
different density. And yarn is consumed in different ways. Therefore, I write about yarn
approximate consumption.
Legend:
ch – CHAİN
inc – increase
dec – decrease
sc – single crochet
sl-st – slip-stitch
PATTERN
PENS.
2 details.
1p-6sc. into magic ring
2p-6xinc = 12p
3p- (1sc., Inc) x6 = 18p
4p-5p-18sc (2 rows)
6p- (4sc., Dec) x3 = 15p
7p-15sc
8p- (dec, 3sc.) X3 = 12p
9p-23p-12sc (15 rows)
Cut off a piece of wire equal to the length of our hand, bend the ends with
Natalya Brutskaya
two sides so that they do not pierce the canvas, and insert into the hand.
Gradually around the wire add filler to the handle. Immediately
give it a shape. The wire is needed for the flexibility of the bear’s handle.
24p-dec
LEGS.
2 details.
The legs are soft without insoles, but if there is a desire, then the size of the sole
cut out the insole from the dense material and insert after 8 rows into the leg.
We knit the sole from yarn of a finishing tone.
7 ch
We start knitting in the second loop of the chain.
1p – 5sc, 3sc in one loop, on the second side of the chain
4sc, inc = 14p
Next, we knit in a circle.
2p- inc, 4sc, 3xinc, 4sc, 2inc = 20p
3p- (1sc, inc), 4sc, (1sb, inc) x3, 4sc, (1sc, inc) x2 = 26p
4p- (2sc, inc), 4sc, (2sb, inc) x3, 4sc, (2sc, inc) x2 = 32p
We pass to the main yarn
5p-8p -32sc
9p – 6sc., (Dec, 1sc.) X6, dec, 6sc = 25p
10p-25sc
11p- 6sc., 7dec, 5sc = 18p
12p-20p -18sc (9 rows)
Add filler.
21p- (1sc., Dec) x6 = 12p
22p-dec
Natalya Brutskaya
BODY. (knit from bottom to top)
1p-6sc. into magic ring
2p-6xinc = 12p
3p- (1sc, inc) X6 = 18p
4p- (2sc, inc) X6 = 24p
5p- (3sc, inc) X6 = 30p
6p- (4sc, inc) x6 = 36p
7p- (5sc, inc) x6 = 42p
8p-42sc
9p- (6sc, inc) x6 = 48p
10p-21p- 48sc (12 rows)
22p- (6sc., Dec) x6 = 42p
23p-42sc
24p-11sc., Dec, (1sc., Dec) x6., 11sc = 35p
25p-35sc
26p-10sc., Dec, (1sc., Dec) x4., 11sc = 30p
27r-32r -30sc (6 rows)
33p- (3sc., Dec) x6 = 24p
34p- (2sc., Dec) x6 = 18p
35p- (1sc., Dec) x6 = 12p
Add the filler, put the mount to attach the head
HEAD (from neck to crown)
1p-6sc. into magic ring
2p-6xinc = 12p
3p- (1sc, inc) X6 = 18p
4p- (2sc, inc) X6 = 24p
5p- (3sc, inc) X6 = 30p
6p- (4sc, inc) x6 = 36p
7p- (5sc, inc) x6 = 42p
8p- (6sc, inc) x6 = 48p
9p- (7sc, inc) x6 = 54p
10p- (8sc, inc) x6 = 60p
11p- (9sc, inc) x6 = 66p
Natalya Brutskaya
We connect the body and head in any way that is convenient for you-mount.
12p-13p – 66sc (2 rows)
14p-4sc., Dec, (9sc., Dec) x5, 5sc = 60p
15p-60sc
16p- (dec, 8sc.) X6 = 54p
17r-18r – 54sc (2 rows)
19p-3sc., Dec, (7sc., Dec) x5, 4sc = 48p
20p-48sc
21p- (dec, 6sc) x6 = 42p
22p-42sc
23p-2sc., Dec, (5sc., Dec) x5, 3sc = 36p
24p-36sc
25p- (dec, 4sc) x6 = 30p
26p- (3sc., Dec) x6 = 24p
27p- (dec, 2sc.) X6 = 18p
Add filler.
28p- (1sc., Dec) x6 = 12p
29p-dec
Natalya Brutskaya
EARS.
1p-6sc. into magic ring
2p-6xinc = 12p
3p- (1sc., Inc) x6 = 18sc
4p-18sl-st
Natalya Brutskaya
Muzzle.
From finishing yarn, we knit in rotary rows, at the end of each row
do ch
3 ch
We start knitting in the second loop of the chain.
1p-incx2 = 4p ch turn
2p-inc, 2sc., Inc = 6p ch rotation
3p-inc, 4sc., Inc = 8p ch turn
4p-inc, 6sb, inc = 10p ch turn
5r-10r-10sc (6 rows)
11p-dec, 6sc., Dec = 8p ch rotation
12p-dec, 4sc., Dec = 6p ch rotation
13p-dec, 2sc., Dec = 4p ch rotation
14p-decx2
Tie around the entire face of the muzzle 1 row sc.
NOSE.
It’s best for the knitting to be very dense, non-transparent,
then the spout will keep its shape, yarn in the likeness of Iris. To crochet
to choose from 1-1,2
5ch
into the second loop from the hook
1p- inc, 2sc., 4sc in one loop of the base,
on the other side of the chain 2sc., inc = 12п
2p- (1sc., Inc) x6 = 18p
3p- (2sc., Inc) x6 = 24p
4p-24sc break the thread, leave for sewing
Natalya Brutskaya
ASSEMBLY
Before assembly, comb the whole teddy bear. On the head, all flew to do
up there and twist such a forelock.
Murzilka does not have eye linings. But Robert and Iris can.
The trimming is very simple. Insert the needle behind the head, right almost near the neck
and bring out where the eyes will be.
T.K. The eyes of the bear are very close to each other, then you can
just with one stitch immediately grab a small area under the eyes and
back to the neck again. There, pull the thread a little and fasten.
Robert, he has a felted nose and a muzzle, but if you do not know how to wallow, then that’s it
it can be connected.
A description of the muzzle and nose is given for the Iris. But it’s easy for Robert
it’s only suitable to take the yarn under your hook with which you knit Robert,
to get in size.
The eyes were blinded from plastic and glued there so blue as if pupils.
The size of the peephole is determined by the size of your teddy bear and its muzzle,
so that all this is commensurate!
Embroider the eyebrows, you can embroider near the eyes such wrinkles, a smile.
The nose is very large, we will decorate it for attractiveness with any
accessories-stewar- snowflake, flower.
In the ears and on the heels you can sew fabric. Cut in size and
sew on. On the heels of the seam should be so prominent, rough, and in
ears neatly with a hidden seam.
Murzilka – on the face there is a convex part, it is not even centered
head, but it turns out a little lower. That’s where we glue the nose. Any
what do you have. Blinded from plastic, ready, you can even pebble
glass for the aquarium, paint black and stick.
Eyes finished with a white felt backing. Do not do bear too much
big eyes will not be very!
My Murzilka has 8mm. The location of the eyes relative to the nose,
look at the photo. Glued eyes.
And now let’s take centuries.
The main yarn to tie a chain of air loops equal to the length of the eye
so that it is slightly covered from above.
I had 6 ch. From the second loop of the chain, tie 5sc.
Knit 2 such details. Pin them with needles to the eye and sew
neatly with a hidden seam. I usually take a suitable bobbin thread
Natalya Brutskaya
colors. The thread is strong, thin, in the fluffy skin is not visible. And a needle
thinner.
Then we will embroider a mouth and eyebrows. I embroider Iris in one thread. Eyebrows
get high, closer to the crown.
You can apply a little tint. Be sure to cheek and where embroidered
edges, slightly shade them.
You knit an iris-muzzle at will, either from finishing yarn or,
like my bear, from the main one. Sew on. Tie your nose, stuff it tight,
so that he was so upright. Sew on.
Iris eyes are ready. I just stuck them.
We connect the handles and legs with a thread mount.
All!!! Our teddy bears are ready!
