Amigurumi Christmas Teddy Bear Free Crochet Pattern
Necessary materials and tools:
1. Yarn of a DC color for the Bears body (I have Alize Cotton Gold No. 21
(gray)), edge DC (Alize Cotton Gold No. 243), white (Alize Cotton Gold No. 01),
dark blue (Alize Cotton Gold No. 245), Alize Softy No. 55 (white)
2. Filler (holofiber)
3. Hook number 2
4. Black beads for eyes d4 mm (4 pcs)
5. Spout 13 * 15 mm black (2 pcs)
6. Blue ribbon 3 mm wide
7. White beads d6 mm 7pcs, d4 mm 1pcs
8. Glue
9. Black thread floss for decoration muzzle
10. Long needle for stitching parts
11. Scissors
When using these materials, the finished toy size is 12cm.
Terms;
sc> single crochet
inc> increase
dec> decrease
Ch> chain
Blo> knitting from the loop
Flo> knitting from the front loop
SL-ST> slip-stitch
HEAD 2 pcs
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: (3 sc, inc) * 6 (30)
6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)
7 row: (5 sc, inc) * 6 (42)
8-13 row (6 rows): 42 sc
14 row: (5 sc, dec) * 6 (36)
15 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
16 row: (3 sc, dec) * 6 (24) begin to fill
17 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
18 row: (1 sc, dec) * 6 (12) fill to the end
19 row: 6 dec (6) pull the hole, hide
tail.
EAR
Knit 2 color details and 2 details
white color. Do not fill.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 18 sc, sl-st
Cut the thread, leaving a long end for
sewing, fold your ear in half and sew two
side for the loops of the last row.
Muzzle
We knit 1 color and 1 white
colors.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (3 sc, inc) * 3 (15)
4 row: 15 sc, sl-st
Cut the thread, leaving a long end for
sewing, do not fill.
HEAD REGISTRATION
Symmetrically sew the ears to the head between 4
and 11 rows (i.e., 5 to 10 rows),
try them first and fix
needles.
Then center between 10 and 17 rows
place the muzzle, fill it a little in
sewing processes.
We divide the floss thread in half and fix
at the bottom of the head, put the thread in the middle
spout, make a stitch in 2 layers, 3 rows down and
we deduce where the eyes will be, leave.
Glue the nose. Sew the eyes between 10 and
11 rows (rasl-standing between them 4 sc or 5
sc, depending on the density of knitting),
pass the thread 2-3 times, slightly pulling in
sewing processes if 5 sc rasst-stoyanie.
With the same thread we embroider the eyebrows, output the thread
at the bottom of the head, fasten, trim.
BODY OF FATHER FROST
Knit with color yarn, fill
tightly as you knit.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: (3 sc, inc) * 6 (30)
6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36) 7-8 row (2 rows): 36 sc
9 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
10 row: we change the thread to the edge and knit for
rear floor hinges (30 BLO)
11-13 (3 rows): 30 sc
14 row: (3 sc, dec) * 6 (24)
15 row: 24 sc
– start to fill
16 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
17 row: 18 sc
– fill
18 row: (1 sc, dec) * 6, sl-st (12)
– fill up
the end.
Cut the thread, leaving a long end for
sewing, fill.
In the 10th row, where we knit for the rear floors of the loop
for the remaining floor loops we knit 30 sc yarn
Alize Softy.
BODY
Knit with DC color yarn, fill
tightly as you knit.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: (3 sc, inc) * 6 (30)
6 row: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36) 7-8 row (2 rows): 36 sc
9 row: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30)
10-11 (2 rows): 30 sc
12 row: change the thread to dark blue and knit 30 sc
13 row: we knit a loop 30 sc for the rear floor
(30 BLO)
14 row: (3 sc, dec) * 6 (24)
15 row: 24 sc – start filling
16 row: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
17 row: 18 sc – fill
18 row: (1 sc, dec) * 6, sl-st (12) – fill to
the end.
Cut the thread, leaving a long end for
sewing, fill.
DRESS
In the 13th row, where we knit for the rear floors of the loop,
for the remaining floor loops begin to knit
skirt.
1 row: 3 ch, 1 DC in one loop, one loop
skip to the next 1DC, ch, 1DC, then
DCow we skip the loop and the next
1DC, ch, 1DC, continue to the end of the row, sl-st at
the end.
2 row: 2 ch, 1DC, ch, 2DC in one loop as
shown in the photo, then in each air
loop of the previous row 2DC, ch, 2DC, sl-st in
the end.
3 row: 2 ch, 1DC, ch, 2DC in one loop, then in
each air loop of the previous row
2DC, ch, 2DC, sl-st at the end.
4 row: 3 ch, 2HDC, ch, 3 HDC in one loop,
then into each air loop
previous row 3HDC, ch, 3 HDC, sl-st at the end
5 row: change the thread to Alize Softy and knit sc in
each loop, sl-st at the end, fasten the thread and
crop.
FRONT FEET
We will knit 2 legs with a red blouse and 2
pcs with dark blue.
We start to knit with yarn of DC color.
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3-4 (2 rows): 12 sc
5 row: 4 sc, dec, dec, 4 sc (10)
6 row: change the thread to the edge DC (Santa Claus)
either on a dark blue (DC little girl) and knit for
rear floor hinges 10 sc
7-12 (6 rows): 10 sc, fill the part tightly,
but not much
13 row: 4dec (6)
Cut the thread, tighten the hole and hide
thread inside the part.
In the 6th row, where we knitted for the rear floor of the loop, for
the remaining half loops knit 10 sc yarn
Alize Softy.
HINDER FEET 4pcs
Knit with DC color yarn, fill
tightly as you knit.
1 row: 6 ch
2 row: 4 sc in the second loop from the hook, 3 sc in
loop the top, then knit on another
chain side: 3 sc, inc (12)
3 row: inc, 3 sc, 3inc, 3sc, 2inc (18)
4 row: 1 sc, inc, 4 sc, inc, 3 sc, inc, 4 sc, inc, 2
sc (22)
5-6 (2 rows): 22 sc
7 row: 7 sc, 4dec, 7 sc (18)
8 row: (1 sc, dec) * 6 (12)
9-14 (6 rows): 12 sc
15 row: 6 dec (6)
Cut the thread, tighten the hole and hide
thread inside the part
TAIL
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: 12 sc
Cut the thread, leaving a long end for
sewing, do not fill.
We sew the head to the torso and proceed to fastening the legs.
THREAD FOOT FASTENING
Symmetrically try on the legs to the body and fix them with needles.
We’ll plant a toy, check the location of the legs, so that everything is
exactly. When the desired position of the legs is found, proceed to
mount. Fix the thread folded in half between 6 and 7 next. We introduce
the needle in the torso at the place of attachment of the back foot and bring to
opposite side, at the attachment point of the second foot. Thread through
the needle between the 13th and 14th rows of the hind foot and grab 3 sc, re-enter
the needle in the body, we deduce where the thread was fixed, pull the foot and
let’s check whether the situation suits.
Then attach the second foot and insert the DCova needle into the torso.
We display the thread in the same place where the first foot was attached, tighten, check
position. If everything suits, then go through two more times for the best
consolidation. Then we introduce the needle in the place of attachment of the lower legs and
print between 4 and 5 next to the top at Santa Claus, and between 3 and 4 next
on top of the little girl, where we will attach the front legs. Thread the needle into
foot between 11 and 12 rows and grab 2 sc. Display thread on
the opposite side at the attachment point of the second foot. Pull up
thread and check the position. Sew on two times, similar to the back.
Insert the needle at the attachment point of the forelegs and draw the thread approximately
where the tail will be located, fix the thread, cut it off.
Try on and sew the tail.
Hats Santa Claus
We start knitting with a pompom with Alize Softy yarn
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3-5 row (3 rows): 12 sc
6 row: 6 dec (6) change the thread to the edge,
fill the pompom.
7 row: 6 sc
8 row: (1 sc, inc) * 3 (9)
9 row: (2 sc, inc) * 3 (12)
10 row: (3 sc, inc) * 3 (15)
11 row: (4 sc, inc) * 3 (18)
12 row: (5 sc, inc) * 3 (21)
13 row: (6 sc, inc) * 3 (24)
14 row: (7 sc, inc) * 3 (27)
15-16 row (2 rows): 27 sc
17 row: (8 sc, inc) * 3 (30)
18 row: (9 sc, inc) * 3 (33)
19-20 row (2 rows): 33 sc change the thread to Alize
Softy
21 row: 33 sc, sl-st
We fix the thread, cut it off. 8 row from
bend the pompom cap and fasten it with a stitch
inside the cap. We will sew a hat to the head.
Hat
Start knitting with a dark blue thread
1 row: 6 sc into magic ring
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 (18)
4 row: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5 row: 24 sc
6 row: (3 sc, inc) * 6 (30)
7 row: 30 sc
8 row: (9 sc, inc) * 3 (33) change the thread to Alize
Softy
9 row: 33 sc, sl-st
We fix the thread, cut it off.
POMPON
Knit with yarn Alize Softy
1 row: 6 sc into magic ring
2 row: 6 sc
3 row: (1 sc, inc) * 3 (9) at the end of sl-st, thread
cut, sew the pompom to the hat.
We will sew a hat to the head of the young lady.
DECORATION
Fix the white thread over the front paws and collect 6 white
beads d6 mm, fix the thread on the opposite side above the second
paw.
We will make a bow with long ends 3.5 cm in size, sew
in the middle is a white d6 mm bead and sew a bow in the center of the dress.
Let’s make the second bow with short ends 1.5 cm in size, embroider
in the middle bead d4 mm and sew to the cap.