Amigurumi Bunny Dolls Free Crochet Pattern

Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else

Abbreviations:

SC – single crochet

İNC – increase

DEC – decrease

CH – chain

About the hook:

For a good result, make sure you use a smaller hook

size than is usually recommended for your yarn. So, you will have

sufficiently dense knit, which will avoid large holes between

columns through which the filler could peek. So

Thus, if the yarn manufacturer recommends using a 3.5 hook, then

better to hook 3.

About yarn:

Personally, I prefer to use cotton yarn for this kind of project,

as it will not stretch after you press the parts tightly.

Its advantage is also that it is very durable. If you decide

use a different yarn then for optimal results

Choose not elastic and durable. The thickness of the yarn does not matter much, just your toy will be of different sizes.

About filler:

There are many types of fillers and the choice is yours. For the best

The result is recommended to densely stuff the details as much as possible.

Body:

We knit with yarn of the 2nd additional color

1p – 6 sc into magic ring

2p – 6inc (12)

3p – (1sc, inc) * 6 (18)

4p – (2sc, inc) * 6 (24)

5p – (3sc, inc) * 6 (30)

6p – (4sc, inc) * 6 (36)

7p – (5sc, inc) * 6 (42)

8p – (6sc, inc) * 6 (48)

9p – (7sc, inc) * 6 (54)

10-18rr – 54sc (9 rows)

19p – (7sc, dec) * 6 (48)

Change color to primary.

20-21rr – 48sc (2 rows)

22p – (6sc, dec) * 6 (42)

23-24rr – 42sc (2 rows)

25p – (5sc, dec) * 6 (36)

26p – 36sc

27p – (4sc, dec) * 6 (30)

28p – 30sc

29p – (3sc, dec) * 6 (24)

30p – 24sc

31p – (2sc, dec) * 6 (18)

32p – 18 sc

Finish sl-st. Trim the thread. Tightly fill with filler.

If you knit a bunny boy, then you need to change the color to the main one after

17th row. Everything else is the same as that of a girl.

Tail:

Knit with the main color yarn

1p – 6 sc into magic ring

2p – 6inc (12)

3p – (1sc, inc) * 6 (18)

4-5rr – 18sc (2 rows)

6p – (dec, 1sc) * 6 (12)

7p – 12sc

Finish knitting sl-st. Trim the yarn, leaving a tail that is long enough

(30cm) for sewing.

Head:

Knit with the main color yarn.

1p – 6 sc into magic ring

2p – 6inc (12)

3p – (1sc, inc) * 6 (18)

4p – (2sc, inc) * 6 (24)

5p – (3sc, inc) * 6 (30)

6p – (4sc, inc) * 6 (36)

7p – (5sc, inc) * 6 (42)

8p – (6sc, inc) * 6 (48)

9p – (7sc, inc) * 6 (54)

10-18rr – 54sc (9 rows)

19p – (7sc, dec) * 6 (48)

20p – (6sc, dec) * 6 (42)

21p – (5sc, dec) * 6 (36)

22p – (4sc, dec) * 6 (30)

23p – (3sc, dec) * 6 (24)

24p – (2sc, dec) * 6 (18)

Finish knitting sl-st. Trim the yarn, leaving

sufficient tail length (80cm) to

sew the head to the body. Put your eyes between

17 and 18 rows at the standard position 11 sc. Stuff

the head is very tight.

Beanie:

We knit with yarn of the 1st extra. colors.

1p – 6 sc into magic ring

2p – 6inc (12)

3p – (1sc, inc) * 6 (18)

4p – (2sc, inc) * 6 (24)

5p – (3sc, inc) * 6 (30)

6p – (4sc, inc) * 6 (36)

7p – (5sc, inc) * 6 (42)

8p – (6sc, inc) * 6 (48)

9p – (7sc, inc) * 6 (54)

10-21rr – 54sc (12 rows)

22p – (7sc, dec) * 6 (48)

Change color to 2nd add. color (purple)

23p – (6sc, dec) * 6 (42)

Finish knitting sl-st. Leave the thread for sewing to the head about 30 cm.

Note. I knitted the hat exactly according to the description, and I got it

very deep. Perhaps it would be better if you knit not 12 rows of 54sc, but

10.

Pens (2pcs):

Knit with the main color yarn

1p – 6 sc into magic ring

2p – 6inc (12)

3p – (1sc, inc) * 6 (18)

4p – (5sc, inc) * 3 (21)

5-6p – 21sc (2 rows)

7p – (dec, 1sc, dec, 2sc) * 3 (15)

8p – 15sc

Change color to 1st additional color

9p – 15sc

10p – dec, 5sc, dec, 6sc (13)

Change color to primary

11-12rr – 13sc

13p – dec, 11sc (12)

14-17rr – 12sc (4 rows)

Fill tightly with filler. The rest of the handle does not need to be filled.

18p – dec, 10sc (11)

19-25rr – 11sc (7 rows)

Knit another 1sc, then fold in half and knit 5sc. Crop

yarn, leaving a tail long enough (30cm) for sewing.

Legs (2pcs):

We knit with yarn of the 1st extra. colors

1p – Dial 6 ch Starting from the 2nd from the hook loop, 4sc, 4sc to the last

a loop. Turn the work and knit from the back, 4sc, 3sc to the last

loop (15)

2p – 1inc, 4sc, 3inc, 5sc, 2inc (21)

3p – 2inc, 6sc, 2inc, 8sc, 3inc (28)

4p – 1inc, 27sc (29)

5p – we knit for the back wall of the loop 29sc (29)

6-7rr – 29sc (2 rows)

8p – 9sc, 4dec, 10sc, dec (24)

Change color to primary

9p – 9sc, 3dec, 9sc (21)

10p – 9sc, 3sc knit together, 9sc (19)

11p – 9sc, dec, 8sc (18)

12p – 18sc

13p – (dec, 4sc) * 3 (15)

14-16rr – 15sc (3 rows)

17p – (dec, 3sc) * 3 (12)

18-19rr – 12sc (2 rows)

Change color to 2nd additional color (purple)

20p – 12inc (24)

21-22rr – 24sc (2 rows)

Finish knitting sl-st. Trim the yarn, leaving a tail that is long enough

(30cm) to sew the leg to the body. Fill up very tight.

Ears (2pcs):

We knit with yarn of the 1st additional color.

1p – 6sc into magic ring

2p – 6inc (12)

3p – (1sc, inc) * 6 (18)

4p – (8sc, inc) * 2 (20)

5p – (9sc, inc) * 2 (22)

6-8rr – 22sc (3 rows)

Change color to primary

9-12rr – 22sc (4 rows)

13p – (dec, 9sc) * 2 (20)

14-16rr – 20 sc (3 rows)

17p – (dec, 8sc) * 2 (18)

18-20rr – 18sc (3 rows)

21p – (dec, 7sc) * 2 (16)

22-24rr – 16sc (3 rows)

25p – (dec, 6sc) * 2 (14)

26-28rr – 14sc (3 rows)

29p – (dec, 5sc) * 2 (12)

30-32rr – 12sc (3 rows)

33p – (dec, 4sc) * 2 (10)

34-36rr – 10sc (3 rows)

Knit another 1sc, then fold in half and knit 4sc. Crop

yarn, leaving a tail long enough (30cm) for sewing.

Assembly (Head-Body-Cap):

Place your head over your body, making sure

so that the ponytails of the yarn are on one side.

This will be the back of the toy. Attach

head to body with sc, capturing

at the same time loops of the head and body.

Fasten the thread, cut, hide the tail.

Put a hat on your head and sew.

Pens:

Sew both handles to the body 1 row below

the connection of the body with the head.

Ears:

Sew the ears to the cap, placing them starting at 5 rows from the center.

Legs:

Sew both legs firmly to the body

Tail:

Sew tail tightly to the back of the body, while stuffing with filler.

Option 1 (Skirt-pack):

Hold the toy upside down, with your back to yourself. Choose where you want

place a pack.

1 row – you need to knit the initial row sc on

toy body: insert the hook horizontally

under 1 loop and exit on the other side of the loop,

grab yarn, stretch and knit sc

(very weak). Insert the hook into the next

loop this row, knit sc as well

This has been done before. Repeat around everything

bodies making sure to stay on the same

next to. Because the body is knitted in a spiral, the end

row will not be at the same level

which is the beginning, so being in the middle

back, you must make the transition. Complete the sl-st row.

2 row – 3 ch lifting and 2dc in the same loop, then we knit

3dc into magic ring Finish sl-st in 3rd ch at

beginning of a row.

3 row – 3 ch lifting, then 1dc into magic ring each loop

previous row. Finish sl-st in 3rd ch at the start

row.

Option 2 (Dress):

Hold the toy upright with your head

down with your back to yourself.

1 row – under 6 next to the body you need

knit the starting row sc on the body

toys: insert hook

horizontally under 1 loop and exit with

the other side of the loop, grab the yarn,

stretch and knit sc (very

weakly). Insert the hook into the next

loop this row, knit sc as well,

as you did before. Repeat

around the whole body making sure that

stayed in the same row. Because body

fits in a spiral, the end of the row is not

will be at the same level as

and the beginning, therefore, being in the middle

back, you must make the transition.

Complete the sl-st row.

2 row – 3 ch lifting and 1dc into the same loop, then we knit 2dc into magic ring each loop

grounds. Finish sl-st in 3rd ch at the beginning of the row.

3 – 7 rows – start with 3 ch and knit further 1dc into magic ring each loop

previous row. Finish sl-st in 3rd ch at the beginning of the row.

8 row (wavy) – 3 ch rise and 1dc in the same loop, then we knit 2dc in

every base loop. Finish sl-st in 3rd ch at the beginning of the row. A thread

trim and hide the tips.

Lami. (see photo for location)

We fix the thread on the back of the sl-st in the 1st row of the dress, knit 19 ch and, as it were

crossing, we go forward and fix there in the middle of 2sl-st, also in the 1st

A row of dresses. Next 19 ch and drive back, crossing with the first strap, fix the sl-st in the 1st row of the dress on the back. Cut and hide the thread

tips.

Backpack

Side parts.

We knit in rotary rows

3 ch rotate

We knit the next 10 rows: 1ch, 3sc, rotate. Fasten the thread and

crop.

Tie another one of the same part.

The main detail.

We knit in rotary rows.

10 ch turn.

We knit 34 rows: 1ch, 10sc, rotate.

Without breaking the thread, put the markers as follows (see figure):

Marker A (MA) – 10 rows down

Marker B (MV) – 2 rows below A

Markers D and E (MD and ME) – same as A and B, only on the other side

Marker C (MS) – 10 rows below D

Assembly and straps

Now we will connect the main part with the side, tying the main

part, attaching the 1st side part, then tying sc top and then

attaching the 2nd side part. To be sure what is right

placed the side parts relative to the main, we will focus

on the markers.

Place the 1st side on the side of the main part of the backpack between

current loop (where we left off) and MA. Now we will knit

capturing the loops of both parts: 1sc in the same loop, 8sc, inc (angle).

Turn the work while continuing to tie the side of the ruzak, 1sc, inc (angle).

Turn back work, 9sc.

We successfully connected the 1st side.

We continue to knit around the top as follows: 11sc, inc (angle), 8sc,

inc (angle), 11sc.

Now you can attach the 2nd side to the main part, knitting again

at the same time loops of both parts. Position the 2nd side along

sides of the main between MS and MD, 9sc, inc (angle). Turn the job, 1sc, pr

(angle). Turn the job, 9sc.

We successfully connected the 2nd side.

Do not cut the thread yet. We still need to make the straps: we knit 3sl-st

along the top of the side to be behind the backpack, 25 ch, 1sc in

the middle of the bottom of the backpack back (see photo), 25 ch, sl-st to attach the 2nd

the little hem is symmetrical to the first at the top of the back of the backpack.

Cut the thread and hide all the ends.

The bow tie:

We knit in rotary rows

3 ch rotate

1 – 4 rows knit: 1ch, 3sc, turn

5 row – 1 ch, 3sc together, turn

6 row – 1 ch, 3sc of 1 loop, turn

7 – 10 rows – 1 ch, 3sc, turn (thread

don’t break off)

Next we bind as follows:

1ch, 2sc, 3sc in 1 loop (angle), 9sc,

3sc in 1 loop (angle), 1sc, 3sc in 1

loop (angle), 9sc, 2sc in 1 loop (1st

row loop), sl-st. Thread cut, leaving

end 20cm long.

Fold the bow tie in half lengthwise

and fasten in the middle with a few stitches. Dial 30ch, fasten

thread and cut, leaving an end length of 30cm. Wrap one end of the chain

ch around the middle of the bow tie 2-3 times. Make a knot and fasten.

Wrap the other end of the ch chain around the bunny’s neck and fasten it under

bow tie. To fasten, pass the yarn through the neck and

print on the back of the head.