Amigurumi Bear And Bunny Free Crochet Pattern With Velvet Rope
Necessary materials
Yarn Himalaya Dolphin baby (120m, 100g) 3 hanks
the main color, who knits weakly, have more in reserve
one little pouch and just a little bit on the legs and muzzle of a light color
For the nose I used ICE Yarns “Amigurumi
Chenille “(100% polyester, 250 m / 50 g) brown,
you can use any other yarn
Hooks 4.5 for plush and 2.5 for spout
Cotter pin, and 2 discs needed for your toy
diameter, depending on what you knit, I used wheels
diameter 65mm
Filler
The needle is a long, strong thread for tightening and
Great desire.
When using these materials, the bear get 56cm
Abbreviations:
sc – single crochet
dc – double crochet
hdc – half double crochet
sl-st – slip-stitch
CH – chain
Dec – decrease
İnc – increase
Double.inc – double increase (in one loop
we knit 3sc)
Double.dec – double decrease (we knit 3sc together)
PATTERN
Paws lower 2pcs
We begin to knit a St. run with yarn. Stuff the foot in knitting process.
Left knit mirror (i.e. read the description from right to left)
o Right:
1) a chain of 6ch, we start from the second loop from the hook:
inc, 3sc, 4sc in the last chain stitch, in the second
side: 3sc, inc (14)
2) 2inc, 3sc, 4inc, 3sc, 2inc (22)
3) (1sc, inc) 2, 3sc, (1sc, inc) 4, 3sc, (1sc, inc) 2 (30)
4) (2sc, inc) 2, 3sc, (2sc, inc) 4, 3sc, (2sc, inc) 2 (38)
5) (3sc, inc) 2, 3sc, (3sc, inc) 4, 3sc, (3sc, inc) 2 (46)
+ 1sc of the previous row, move the marker.
6) (4sc, inc) 2, 3sc, (4sc, inc) 4, 3sc, (4sc, inc) 2 (54)
7) Change the color to the main and we knit for the rear floor walls 54sc
8) -12) 54sc (5 rows)
13) 17sc, double.dec, 13sc, double.dec, 18sc (50)
14) 17sc, double.dec, 3sc, double.dec, 3sc, double.dec, 17sc, dec capture the column of the previous row, carry marker (44)
15) 15sc, double.dec, 2sc, double.dec, 2sc, tr.dec, 15sc (37)
16) 12sc, double.dec, 7sc, double.dec, 12sc (33)
17) 11sc, double.dec, 5sc, double.dec, 11sc (29)
18) 29sc
19) 12sc, dec, 15 (28)
20) 28sc
+ 1sc of the previous row, move the marker.
21) 11sc, dec, 15sc (27)
22) 27sc
23) 10sc, dec, 15sc (26sc)
24) 26sc
25) 9sc, dec, 15sc (25)
26) 8sc, dec, 10sc, dec, 3sc (23)
27) 11sc, dec, 6sc, dec, 2sc (21)
28) 21sc
29) 17sc, dec, 2sc (19)
30) 20sc
31) 16sc, dec, 2sc (18)
32) 3sc, add the part
in half, knit together
9sc, fasten and cut the thread.
Upper paws 2pcs
Both legs are knitted equally
Knit with the main color yarn
1) 2 CH, in the 2nd loop from the hook: 6 sc (6)
2) 6inc (12)
3) (inc, 1sc) 6 (18)
4) (inc, 2sc) 6 (24)
5) (inc, 3sc) 6 (30)
6) -9) 30sc (4 rows)
10) 2 double.dec, 24sc (26)
11) 26sc
12) Dec, 24sc (25)
13) 25sc
14) Dec, 23sc (24)
15) 24sc
16) Dec, 22sc (23)
17) 23sc
18) Dec, 21sc (22)
19) 22sc
20) Dec, 20sc (21)
21) 21sc
22) Dec, 19sc (20)
23) 20sc
24) Dec, 16sc, dec (18)
25) 6sc presser foot
fold in half and knit together 9sc, fasten and cut the thread.
Torso
The marker of the beginning of the row runs in the middle of the back !!!!!
The body is stuffed in the process of knitting
Knit with the main color yarn
1) 2 CH, in the 2nd loop from the hook: 6 sc (6)
2) 6 inc (12)
3) (1 sc, inc) 6 (18)
4) (inc, 2 sc) 6 (24)
5) (3 sc, inc) 6 (30)
6) 2 sc, inc, (4 sc, inc) 5, 2 sc (36)
7) (5 sc, inc) 6 (42)
8) 3 sc, inc, (6 sc, inc) 5, 3 sc (48)
9) (7 sc, inc) 6 (54)
10) 4 sc, inc, (8 sc, inc) 5, 4 sc (60)
11) (9 sc, inc) 6 (66)
12) 5sc, (inc, 10sc) 5, inc, 5sc (72)
13) 16sc, (inc, 3sc) 3, inc, 14sc, inc, (3sc, inc) 3, 16sc (80)
14) 11sc, 11sc on the lower left paw (why 11sc, total loops 9? I grab one more column from each side), 36sc,
11sc on the right lower paw, 11sc.
15) -21) 80sc (7 rows)
22) (2sc, dec) 2, 64sc, (dec, 2sc) 2 (76)
23) 1sc, double.dec, 68sc, double.dec, 1sc (72)
24) 16sc, (dec, 3sc) 3, dec, 6sc, dec, (3sc, dec) 3, 16sc (64)
25) 16sc, (dec, 2sc) 3, dec, 4sc, dec, (2sc, dec) 3, 16sc (56)
26) 15sc, dec, 3sc, dec, 12sc, dec, 3sc, dec. 15sc (52)
27) 14sc, dec, 2sc, dec, 12sc, dec, 2sc, dec, 14sc (48)
28) (10sc, dec) 4 (44)
29) 44sc
30) (dec, 9sc) 4 (40)
31) 40sc
32) 4sc, 11sc top
foot (see 14 row). 10sc,
11sc on the upper foot,
4sc (40)
33) 15sc, dec, 6sc, dec,
15sc (38)
34) (5sc, dec) 2, 10sc, (dec,
5sc) 2 (34)
35) (4sc, dec) 2, 10sc,
(dec, 4sc) 2 (30)
36) 30sc – insert the cotter pin with
disk or joint.
37) (3sc, dec) 6 (24)
38) 1sc, (dec, 2sc) 5, dec, 1sc (18)
39) (1sc, dec) 6 (12)
40) 6dec, thread
fasten and trim
Head
We fill the head in the process of knitting
Knit with the main color yarn
1) 6Ch, in the 2nd loop from the hook: inc, 3sc, 4sc in
the last loop of the chain, on the second side: 3sc, inc (14)
2) 2inc, 3sc, 4inc, 3sc, 2inc (22)
3) (1sc, inc) 2, 3sc, (1sc, inc) 4, 3sc, (1sc, inc) 2 (30)
4) (2sc, inc) 2, 3sc, (2sc, inc) 4, 3sc, (2sc, inc) 2 (38)
5) (3sc, inc) 2, 3sc, (3sc, inc) 4, 3sc, (3sc, inc) 2 (46)
6) (4sc, inc) 2, 1sc, inc, 1sc, (4sc, inc) 4, 1sc, inc,
1sc, (4sc, inc) 2 (56)
7) 56sc
8) 6sc, inc, (13sc, inc) 3, 7sc (60)
9) 60sc
10) (9sc, inc) 6 (66)
11) 66sc
12) (10sc, inc) 6 (72)
13) 72sc
14) (11sc, inc) 6 (78)
15) -22) 78sc (8 rows)
23) (11sc, dec) 6 (72)
24) 72sc
25) (10sc, dec) 6 (66)
26) 66sc
27) (9sc, dec) 6 (60)
28) 60sc
29) (8sc, dec) 6 (54)
30) 54sc
We fix the head with
using the disk and
round pliers.
31) (7sc, dec) 6 (48)
32) (6sc, dec) 6 (42)
33) (5sc, dec) 6 (36)
34) (4sc, dec) 6 (30)
35) (3sc, dec) 6 (24)
36) (2sc, dec) 6 (18)
37) (1sc, dec) 6 (12)
38) 6dec, fasten the thread,
crop, tighten the hole
Muzzle
Knit beige yarn
1) 5Ch, in the 2nd loop from the hook: inc, 2sc, 4sc in the last
from the hook eyelet, on the second side: 2sc, inc (12)
2) 2inc, 2sc, 4inc, 2sc, 2inc (20)
3) (1sc, inc) 10 (30)
4) (2sc, inc) 10 (40)
5) (3sc, inc) 10 (50)
6) (4sc, inc) 10 (60)
7) 60sc, sl-st, fasten thread and
Crop
Nose
Knit brown yarn
I have ICE Yarns “Amigurumi Chenille” yarn
(100% polyester, 250 m / 50 g) hook 2.5
1) 5Ch, in the 2nd loop from the hook: inc, 2sc, 4sc in the last ..
from a hook a loop, on
second side: 2sc, inc (12)
2) 2inc, 2sc, 4inc, 2sc, 2inc (20)
3) 20sc, thread fasten and
trim leaving a long
end for sewing.
Sew
muzzle so
to bottom
in contact with
neck of the bear
adding
filler.
Sew on
eyes, in the process of sewing a little bit weaken
face.
(I sew eyes like this: I introduce a long, strong thread into
the lower side of the head, leave a long end,
then I bring the needle to the place where the eye should be,
further into the eyelet, then I enter into the place where
we sew the eye and put the needle back, then tighten
I’m threading as much as I need and tightly knotted.
I repeat as necessary. I also sew the second
eye) You can sew an eye, but
Then make a tightening. How do you
it will be convenient.
We share the dark thread
face
Sew on the nose
The remaining tip of the thread
from the nose we embroider the eyebrows
Ears for a bear
1) 2Ch, in the 2nd loop from the hook: 6sc
2) 6inc (12)
3) 12 inc (24)
4) 24sc
5) (1sc, inc) 12 (36)
6) 36
7) -9) 15sc, 21hdc (3 rows) thread
fasten and trim.
Sew ears at the level that you like)
The inner side of the eye is the one where the floor was knitted
bollards
Bunny ears
Hook 0.5 larger
Rotary rows, in each row a lifting loop, in
I do not indicate this description.
1) Chain of 7ch, with the second from the hook inc, 4sc, inc
2) İnc, 6sc, inc
3) İnc, 8sc, inc
4) İnc, 10sc, inc
5) İnc, 12sc, inc
6) İnc, 14sc, inc
7) İnc, 16sc, inc
8) -29) 20sc (22 rows)
30) Dec, 18sc
31) Dec, 17sc
32) Dec, 16sc
33) Dec, 15sc
34) Dec, 14sc
35) Dec, 13sc
36) Dec, 12sc
37) Dec, 11sc
38) Dec, 10sc
39) Dec, 9sc
40) -41) 10sc (2 rows)
The thread is not
we cut
tie the eye
around the clock
beginning of 41st
Cut
fleece lining
Sew and sew.
Sew the eyelet to the bunny
Tail
Knit with the main color yarn
1) 2Ch, in the 2nd loop from the hook: 6sc
2) 6inc (12)
3) (1sc, inc) 6 (18)
4) (2sc, inc) 6 (24)
5) 24sc
6) (2sc, dec) 6, sl-st (18)
Tail to sew
Bear and bunny is ready !!!!
You can decorate a toy by tying a beautiful bow on his neck and in
paws give a big
heart!!!!
As a result of testing
born, these are hugs
Gold pens Oksanochki
Konovalova
Golden Helen Pens
Simashina