Amigurumi Basic Cat Free Crochet Pattern

Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else

Abbreviations:

• ch – chain

• sc – single crochet

• inc – increase

• dec – decrease

Head

Crochet kitten: pattern. The marker passes through the muzzle.

1 row: 6sc in the amigurumi ring = 6sc

2 row: 6inc = 12sc

3rd row: (1inc, 1sc) * 6 times = 18sc

4 row: (1inc, 2sc) * 6 times = 24sc

5 row: (1inc, 3sc) * 6 times = 30sc

6 row: (1inc, 4sc) * 6 times = 36sc

7 row: 5sc, 1inc, (11sc, 1inc) * 2 times, 6sc = 39sc

8 row: 6sc, 1inc, (12sc, 1inc) * 2 times, 6sc = 42sc

9 row: 6sc, 1inc, (13sc, 1inc) * 2 times, 7sc = 45sc

10 row: 45sc in a circle = 45sc

11 row: 7sc, 1inc, (14sc, 1inc) * 2 times, 7sc = 48sc

12 row: 48sc in a circle = 48sc

13 row: (2sc, 1inc) * 4 times, 24sc, (1inc, 2sc) * 4 times = 56sc

14 row: (3sc, 1inc) * 4 times, 24sc, (1inc, 3sc) = 64sc

15-17 series: 64sc in a circle = 64sc

18 row: 16sc, 1dec, 28sc, 1dec, 16sc = 62sc

19 row: (6sc, 1dec) * 2 times, 30sc, (1dec, 6sc) * 2 times = 58sc

20 row: (4sc, 1dec) * 4 times, 10sc, (1dec, 4sc) * 4 times = 50sc

21 row: 6sc, 1dec, 2sc, 1dec, 4sc, 1dec, 2sc, 1dec, 6sc, 1dec, 2sc, 1dec, 4sc, 1dec, 2sc, 1dec,

6sc = 42sc

22 row: (5sc, 1dec) * 6 times = 36sc

23 row: (4sc, 1dec) * 2 times, 12sc, (1dec, 4sc) * 2 times = 32sc

24 row: (4sc, 1dec) * 2 times, 8sc, (1dec, 4sc) * 2 times = 28sc

25 row: (3sc, 1dec) * 2 times, 8sc, (1dec, 3sc) * 2 times = 24sc

26 row: (2sc, 1dec) * 6 times = 18sc

We leave an open hole, we do not tighten the loops, we do not cut the thread. We stuff the detail: at the crown – moderately elastic, in the cheeks – a little denser.

Torso (1 piece)

Crochet kitten: pattern. We continue knitting from the left open loops of the head. Do not stuff the part until the frame is inserted.

27 row: (2sc, 1inc) * 6 times = 24sc

28 row: (3sc, 1inc) * 6 times = 30sc

29 row: (2sc, 1inc) * 3 times, 12sc, (1inc, 2sc) * 3 times = 36sc

30 row: (3sc, 1inc) * 3 times, 12sc, (1inc, 3sc) * 3 times = 42sc

31 row: (6sc, 1inc) * 2 times, 14sc, (1inc, 6sc) * 2 times = 46sc

32 row: (7sc, 1inc) * 2 times, 14sc, (1inc, 7sc) * 2 times = 50sc

33 row: (7sc, 1inc) * 2 times, 5sc, 1inc, 6sc, 1inc, 5sc, (1inc, 7sc) * 2 times = 56sc

34 row: (8sc, 1inc) * 2 times, 20sc, (1inc, 8sc) * 2 times = 60sc

We carefully look at the marker, it should be in the center of the part, if this is not so, we will adjust its position.

35 row: 2sc, 1inc, 7sc, 10 base loops skip, (6sc, 1inc) * 2 times, 6sc, 10

base loops skip, 7sc, 1inc, 2sc = 44sc

36 row: 3sc, 1inc, 5sc, 1inc, 24sc, 1inc, 5sc, 1inc, 3sc = 48sc

37 row: 10sc, 1inc, 26sc, 1inc, 10sc = 50sc

38 row: 10sc, 1inc, 28sc, 1inc, 10sc = 52sc

39 row: 10sc, 1inc, 7sc, 1dec, 12sc, 1dec, 7sc, 1inc, 10sc = 52sc

40 row: 9sc, 1inc, 7sc, 1inc, 16sc, 1inc, 7sc, 1inc, 9sc = 56sc

41 row: 6sc, 1dec, 11sc, 1inc, 16sc, 1inc, 11sc, 1dec, 6sc = 56sc

42 row: 4sc, 1dec, 13sc, 1inc, 16sc, 1inc, 13sc, 1dec, 4sc = 56sc

43 row: 56sc in a circle = 56sc

44 row: 3sc, 1dec, 15sc, 1inc, 14sc, 1inc, 15sc, 1dec, 3sc = 56sc

We carefully look at the marker, it should be in the center of the part, if this is not so, we will adjust its position.

45 row: 27sc, 2 skip base loops, 2ch, 27sc = 56sc

46 row: 2sc, 1dec, (7sc, 1dec) * 2 times, 12sc, (1dec, 7sc) * 2 times, 1dec, 2sc = 50sc

47 row: 50sc in a circle = 50sc

48 row: 3sc, 1dec, 15sc, 1dec, 6sc, 1dec, 15sc, 1dec, 3sc = 46sc

49 row: (7sc, 1dec) * 2 times, 10sc, (1dec, 7sc) * 2 times = 42sc

50 row: 42sc in a circle = 42sc

51 row: (6sc, 1dec) * 2 times, 10sc, (1dec, 6sc) * 2 times = 38sc

Frame

Crochet kitten: pattern. Forming the frame, it must be taken into account that it will be located approximately in the center of the body.

Focusing on the photo, and trying on the connected parts of the head and body, form a figure from the prepared wire.

To form a framework, start with the head. Bend the wire so that one end is 20cm longer than the other.

Leaving the wire for the frame of the legs and tail, focus on the following proportions of the finished toy:

– the length of the forelegs will be 3/4 of the length of the body (the palm should be at the level of the hips);

– the height of the hind legs is 1/3 of the length of the body + foot about 1.5 cm;

– the length of the tail will be 3/4 of the length of the body (the length of the tail should be sufficient to support the finished toy).

After we bent the wire to the required size, we take a double-sided tape and a cotton pad.

All frame details are aligned from the waves. Double wires, we press tightly to each other, leaving small loops on the palms, feet and head. We wrap it with tape.

We draw tape with a cotton pad, so that all the tape is covered with cotton.

Then, remove excess cotton. The layer should be uniform. Such processing of the frame will not allow parts to slide on it.

Twist the free ends of the wire. Cut off the excess. We twist the ends of the wire inward, along the frame of the body and wrap it with tape together with the frame.

We insert the frame into the finished part of the head and body. For convenience, raise the front legs and tail up to the head. Gradually insert the frame into the part, pulling the tail into the holes left and front legs.

Bend the hind legs slightly and spread them towards the hips. Stuff your torso. The packing density is moderate.

Paws

We knit the hind legs along the open loops of the 51st torso. We carefully look at the body marker,

Left foot

We knit the left foot on the first 19 loops of 51 rows of the trunk. Fill the part as you knit. The packing density is moderate.

1 row: 19sc = 19sc

Insert a new marker for the left foot. The marker runs along the inner edge of the foot.

Be sure to follow the marker and, if necessary, adjust its position.

2 row: 1dec, 15sc, 1dec = 17sc

3-4 row: 17sc in a circle = 17sc

5 row: 1dec, 13sc, 1dec = 15sc

6-7 rows: 15sc in a circle = 15sc

8 row: 1dec, 11sc, 1dec = 13sc

9 row: 13sc in a circle = 13sc

10 row: 2sc, 3inc, 4sc, 1dec, 2sc = 15sc

11 row: 2sc, 5inc, 3sc, 1dec, 1sc, 1dec = 18sc

12 row: (1dec, 1sc,) * 6 times = 12sc

13 row: 6 dec = 6sc

Loops to tighten. The tightened loops are on the sole.

Right foot

We knit the right foot on the remaining open 19 loops of 51 rows of the torso. Fill the part as you knit. The packing density is moderate.

1 row: 19sc = 19sc

Insert a new marker for the right foot. The marker runs along the inner edge of the foot.

Be sure to follow the marker and, if necessary, adjust its position.

2 row: 1dec, 15sc, 1dec = 17sc

3-4 row: 17sc in a circle = 17sc

5 row: 1dec, 13sc, 1dec = 15sc

6-7 rows: 15sc in a circle = 15sc

8 row: 1dec, 11sc, 1dec = 13sc

9 row: 13sc in a circle = 13sc

10 row: 2sc, 1dec, 4sc, 3inc, 2sc = 15sc

11 row: 1dec, 1sc, 1dec, 3sc, 5inc, 2sc = 18sc

12 row: (1sc, 1dec) * 6 times = 12sc

13 row: 6 dec = 6sc

Loops to tighten. The tightened loops are on the sole.

Bend the hind legs to form a foot. Sew a small hole formed between the legs with a needle.

Front foot (2 parts)

We knit the forelegs along the open loops of the 35th row of the trunk.

Fill the part as you knit. The packing density is moderate.

A set of loops begins from the center of the armpit: 2 loops on the 36th row of the trunk, then open 10 loops of the 35th row, and again along the 36th row of the trunk 2 loops.

1 row: 14sc = 14sc

Insert a new marker for the front foot. The marker passes from the armpit and palm.

The palm is turned to the body. Be sure to follow the marker and, if necessary, adjust its position.

2 row: 1dec, 12sc = 13sc

3-5 rows: 13sc in a circle = 13sc

6 row: 1dec, 11sc = 12sc

7-8 rows: 12sc in a circle = 12sc

9 row: (2sc, 1dec) * 3 times = 9sc

10 row: (1sc, 1inc) * 4 times, 1sc = 13sc

11-13 rows: 13sc in a circle = 13sc

14 row: 6dec, 1sc = 7sc

Tail

Crochet kitten: pattern. Do not stuff the part with filler. You can not follow the marker.

When stitching, leave 15cm of thread for sewing. Knitting starts from the base of the tail.

1 row: 5ch short to ring = 5sc

2 row: 1inc, 4sc = 6sc

3rd row: (1inc, 1sc) * 3 times = 9sc

4-5 rows: 9sc in a circle = 9sc

6 row: 1inc, 8sc = 10sc

7-11 rows: 10sc in a circle = 10sc 12 row: 1dec, 8sc = 9sc

13 row: 1dec, 7sc = 8sc

14 row: 1dec, 6sc = 7sc

15 row: 1dec, 5sc = 6sc

16 row: all decreases until the hole is closed.

Ears (2 parts)

We will carry out the marking, according to which we will knit the ears

With pins, mark the points first for the left eye, and then on the other side of the head marker, symmetrically for the right eye. Make sure the layout is symmetrical. Only then proceed with the set of loops.

The left and right ears fit identically:

Draw eyelets for the eyelet, right on the knitted fabric of the head at the points.

Start looping from point 1.

When knitting, the marker is not used.

Knit in rotary rows, without lifting loops.

Make sure that the knitting is not loose

1st row: dial 12 loops:

on the outside between points 1 and 2 – 1 loop, 2 and 3 – 2 loops, 3 and 4 – 3 loops,

4 and 5 – 1 loop;

2 row: 1sc, 1inc, 5sc, 1inc, 4sc = 14sc

3rd row: 10sc, 1dec, 2sc = 13sc

4 row: 2sc, 1dec, 4sc, 1dec, 3sc = 11sc

5 row: 4sc, 1dec, 1sc, 1dec, 2sc = 9sc

6 row: 2sc, 2dec, 3sc = 7sc

7 row: 3sc, 2dec = 5sc

8 row: 1dec, 1sc, 1dec = 3sc

Tie the eyelet along the contour with connecting posts. Do not stretch the loops, knit tightly. On the upper edge, from the crown to the cape – 8 loops, from the cape to the cheekbones – 9 loops.

Fasten and thread all the threads inward.

Decor

Make your cheeks and eyes tight.

Perform tinting in the eye area. Try on the eyes. Put them on glue or sew. Pull the nose out of a small piece of wool. For the eyes and nose, you can also use semi beads, or black beads of a suitable size.

Comb a little kitten. Walk lightly with a felting needle all over the “hair”, mark the folds on the face and under the ass.

Embroider fingers on paws

Mustache and eyebrows

Cut the fishing line into 10 pieces of 10cm. Fold each of the segments in half and tie or glue on the face in the mustache area three pieces and two pieces in the eyebrow area.

And now your kitten is crocheted ready!