Termonology
MR Magic Ring

Ch Chain

Sl st slip stitch
Sc single crochet
Hdc half double crochet
Dc double crochet

Tr (or trc) triple (or treble) crochet
Inc increase (Add one or more stitches.)
Dec decrease (Eliminate one or more stitches.)

 You will need:

1. Himalaya “Koala” (100% micropolyester, 100 m / 100 g) – 6 skeins (with a small margin). Tie

plain dog or combine 2 colors – in this case, take 4 + 2 or 3 + 3 skeins.

Hook 4.5 mm or any other convenient for you. For the nose you need a thread of a similar footage

or a little thinner. I have Himalaya “Dolphin Baby” color 80337 milk chocolate, hook 4 mm.

2. Filler (holofiber) – 200-300 g.

3. Black eye buttons, I have a diameter of 20 mm.

4. A small piece of white foamiran (plastic suede) or felt for eye protein. Thickness

foamirana – 2 mm.

5. Mouline thread or Iris brown for embroidery eyebrows.

6. Needle with a blunt end for securing the ends of the threads and sewing parts, a long needle for

sewing on the eye.

7. Optionally – a dry pastel for tinting, you can tint with whatever you like

way.

When using these materials, the dog turns out to be 50 cm tall.

We knit correctly

The toy is knitted in a spiral, without connecting posts and lifting loops.

Front side of the part: Wrong side of the part:

The description of knitting of this toy is based on the fact that the beginning of the row throughout knitting

the entire part does not move and runs in a straight line, but since we knit in a spiral, without loops

lifting and connecting column, the beginning of the row will shift right, so every 4-5

rows need to be knit at the end of the row an additional column of displacement, so that the beginning of the row again

It turned out to be in the same place. These additional columns in the description of the series are not taken into account.

Thanks to this way of presenting the description, you will always know where exactly you should have

increase or decrease, and the elbow / knee will always be exactly where they should be.

The offset of the beginning of the row when knitting in a spiral may differ for different yarns and for different

density of knitting, so aligning the marker makes the description universal – from any yarn, in

any hands will get exactly such a detail as it should be.

If you knit from Himalaya “Koala”, Alize “Softy” or other similar thread, before starting work

inspect all hanks and compare the amount of pile on the thread-basis. Even in one lot, there are hanks with

different pile. Do not use these skeins to knit paired parts. Put them on your body or head,

or knit both paired parts from one skein.

Upper legs

Until the fifth row, the marker is not shifted, then follow the instructions in microns.

1 row: 6 ch, from the second loop from the hook: 4 sc, 3 sc to the first loop, on the other side of the chain: 3 sc, inc (12)

2 row: inc, 3 sc, inc x 3, 3 sc, inc x 2 (18)

3 row: (7 sc, inc x 2) x 2 (22)

4 row: 8 sc, inc x 2, 9 sc, inc x 2, sc (26)

5 row: 23 sc, we do not tie the row to the end, we put a marker here. Now the beginning of the series will be here – this

middle of the outside of the foot. As a guideline of the middle – the chain of the first row – the beginning of the row should

be opposite. If this is not the case, tie up another column or move the marker to the column to the right.

Align the marker during the knitting process.

6-8 rows (3 rows): 26 sc (26)

9 row: 11 sc, dec x 2, 11 sc (24)

10 row: 10 sc, dec x 2, 10 sc (22)

11 row: 9 sc, dec x 2, 6 sc, dec, sc (19)

12 row: sc, dec, 5 sc, dec x 2, 7 sc (16)

13 row: 13 sc, dec, sc (15)

14 row: sc, dec, 9 sc, dec, sc (13)

15 row: sc, dec, 10 sc (12)

Fill the foot with filler, loose. It

should remain flat and soft. The upper (narrow) part of the foot is NOT stuffed.

16-27 rows (12 rows): 12 sc (12)

Mark the 6th sc in the last row of the right foot with an extra marker.

We cut the thread, fix it. We knit the second foot in the same way.

Lower paws

Until the fifth row, the marker is not shifted, then follow the instructions in microns.

1 row: 9 ch, from the second loop from the hook: 7 sc, 3 sc to the first loop, on the other side of the chain: 6 sc, inc (18)

2 row: inc, 6 sc, inc x 3, 6 sc, inc x 2 (24)

3 row: inc, 9 sc, inc x 3, 9 sc, inc x 2 (30)

4 row: (12 sc, inc x 3) x 2 (36)

5 row: 34 sc, we do not tie the row to the end, we put a marker here. Now the beginning of the series will be here – this

mid heel. As a guideline of the middle – the chain of the first row – the beginning of the row should be

opposite. If this is not the case, tie up another column or move the marker to the column to the right.

Align the marker during the knitting process.

6-11 rows (6 rows): 36 sc (36)

12 row: 13 sc, dec, (2 sc, dec) x 2, 13 sc (33)

13 row: 13 sc, dec, (sc, dec) x 2, 12 sc (30)

14 row: 12 sc, dec x 3, 5 sc, (dec, sc) x 2, dec (use the first column of the next row) (24)

15 row: (sc, dec) x 2, 18 sc (22)

16 row: 19 sc, dec, sc (21)

17 row: sc, dec, 18 sc (20)

Fill the foot with filler, loose. Top (narrow)

part of the foot is NOT stuffed.

18-29 rows (12 rows): 20 sc (20)

Mark the 10th sc in the last row of the right foot with an extra marker.

We cut the thread, fix it. We knit the second foot in the same way.

Body

The marker at the beginning of the row runs in the middle of the back.

1 row: 2 ch, 6 sc in the first loop (6)

2 row: inc x 6 (12)

3 row: (inc, sc) x 6 (18)

4 row: sc, inc, (2 sc, inc) x 5, sc (24)

5 row: (3 sc, inc) x 6 (30)

6 row: 2 sc, inc, (4 sc, inc) x 5, 2 sc (36)

Place the second marker in the middle of the row to notice errors earlier.

7 row: (5 sc, inc) x 6 (42)

8 row: 3 sc, inc, (6 sc, inc) x 5, 3 sc (48)

9 row: (7 sc, inc) x 6 (54)

10 row: 4 sc, inc, (8 sc, inc) x 5, 4 sc (60)

11 row: (9 sc, inc) x 6 (66)

12 row: 5 sc, inc, (10 sc, inc) x 5, 5 sc (72)

13 row: (11 sc, inc) x 6 (78)

14 row (knit the lower paws): 14 sc, apply the left lower paw to the body, enter

hook to the last column of the foot, then to the body column along the knitting and knit 10 sc through 2

paintings:

continue to knit on the body: 30 sc, put the right lower foot to the body, insert the hook into

marked column of the foot, then into the body column along the knitting and knit 10 sc through 2 canvases:

continue to knit on the body: 14 sc (78)

In the next row, when passing from the body to the foot and from the foot to the body, small holes may occur.

To avoid them, I recommend in these places to capture the corner loops (which do not participate in knitting) and knit them as a decrease along with the working column. Use the same method when knitting the upper legs and head.

15 row: 14 sc, 10 sc along the free loops of the left lower foot, 30 sc, 10 sc along

loops of the lower right foot, 14 sc (78)

16-24 rows (9 rows): 78 sc (78)

25 row: (dec, 11 sc) x 6 (72)

26 row: 72 sc (72)

27 row: 5 sc, dec, (10 sc, dec) x 5, 5 sc (66)

28 row: 66 sc (66)

29 row: (dec, 9 sc) x 6 (60)

30 row: 60 sc (60)

31 row: 17 sc, dec, (6 sc, dec) x 3, 17 sc (56)

32 row: 25 sc, dec, 2 sc, dec, 25 sc (54)

33 row: 54 sc (54)

34 row: (dec, 7 sc) x 6 (48)

35-39 rows (5 rows): 48 sc (48)

In the next row we knit the upper legs similarly to the lower ones.

40 row (we knit the upper legs): 9 sc, 6 sc together with the left foot, continue to knit

body: 18 sc, 6 sc together with the right foot, continue to knit on the body: 9 sc (48)

41 row: 9 sc, 6 sc along the free loops of the left foot, continue to knit over the body: 18 sc, 6 sc

on the free loops of the right foot, continue to knit on the body: 9 sc (48)

42-44 rows (3 rows): 48 sc (48)

45 row: 3 sc, dec, (6 sc, dec) x 5, 3 sc (42)

46 row: (dec, 5 sc) x 6 (36)

47 row: 2 sc, dec, (4 sc, dec) x 5, 2 sc (30)

In the next row we mark with an additional marker

18th sc.

48 row: (dec, 3 sc) x 4, dec, sc (mark it with an additional marker), 2 sc, dec, 3 sc (24)

We cut the thread, fix it. We stuff the body

filler, loose. The body should remain soft.

Head

Until the sixth row, the marker is not shifted, then follow the instructions in microns.

1 row: 13 ch, from the 2nd loop from the hook: 11 sc, 3 sc to the last loop, on the other side of the chain: 10 sc, inc (26)

2 row: inc, 10 sc, inc x 3, 10 sc, inc x 2 (32)

3 row: sc, inc, 11 sc, inc, (sc, inc) x 2, 11 sc, inc, sc, inc (38)

In the next row, we mark the 19th sc with an additional marker.

4th row: sc, inc, 12 sc, inc, 2 sc (mark the second column with an additional marker), inc,

2 sc, inc, 12 sc, inc, 2 sc, inc, sc (44)

5 row (we knit a hole for the mouth): 20 ch, 18 sc skip, continue to knit with

the column marked in the previous row: inc, 3 sc, inc, 16 sc, inc, 3 sc, inc (50)

6 row: 20 sc in a chain, 15 sc, row to kwe do not tie the end, we put a marker here. Now the beginning of the row

will be here – this is the middle of the upper part of the nose. We align the marker in the process of knitting the head.

7-10 rows (4 rows): 50 sc (50)

While we put off knitting the head and knit ROTIK. Pull the end of the thread from the middle of the skein or

use a thread from another hank. We unfold the muzzle with the beginning of knitting to ourselves and attach

thread to the corner of the knitted hole on the right side:

1 row: 1 sc in the corner, 18 sc in the missing columns of the muzzle, 1 sc in the corner, 20 sc in

chain (40)

On the edge of the connected columns we stretch a contrasting thread – it will help you orient yourself where

insert the hook when closing the mouth opening.

2 row: 40 sc (40)

Pull the small end of the thread (so that it is enough for 20 sl-st) and cut it. Turn the mouth inside

muzzle and pull the working thread:

We continue to knit the connecting posts through 2 canvases, introducing the hook into the marked with a marker

loops (i.e. we knit under the loops of the previous row):

We knit 20 sl-st to the end of the mouth. We fix the thread, cut off the excess and twist the muzzle on

front side.

We continue to knit the head.

11 row: 42 sc, (dec, sc) x 2, dec (47)

12 row: dec, (sc, dec) x 2, 31 sc, (dec, 2 sc) x 2 (42)

13 row: (2 sc, dec) x 2, 34 sc (40)

If you want to make the muzzle a different color, in the 14th row after the 20th column, replace the thread (so,

so that the color transition falls on the lower part of the head and is invisible).

14 row: 29 sc, inc, (sc, inc) x 5 (46)

15 row (we knit a hole under the left eye): (inc, sc) x 5, inc, 20 sc, (inc, 2 sc) x 3, inc, 1 ch,

1 sc skip, sc, inc, 2 sc (57)

16 row (we knit a hole under the right eye): 2 sc, inc, sc, 1 ch, 1 sc skip, inc,

(2 sc, inc) x 3, 42 sc (62)

17 row: 49 sc, inc, (3 sc, inc) x 3 (66)

18 row: (inc, 3 sc) x 3, inc, 53 sc (70)

19 row: 57 sc, inc, (3 sc, inc) x 3 (74)

20 row: (inc, 3 sc) x 3, inc, 61 sc (78)

21 row (we knit the body): 33 sc, put the head to the body, insert the hook into the marked column

body from the wrong side to the outside, then into the head column along the knitting and knit 12 sc through 2

webs, continue to knit on the head: 33 sc (78)

22 row: 33 sc, continue to knit on the free columns of the body: 12 sc on the body, continue to knit

on the head: 33 sc (78)

23-28 rows (6 rows): 78 sc (78)

29 row: (dec, 11 sc) x 6 (72)

30 row: 5 sc, dec, (10 sc, dec) x 5, 5 sc (66)

31 row: (dec, 9 sc) x 6 (60)

32 row: 4 sc, dec, (8 sc, dec) x 5, 4 sc (54)

33 row: (dec, 7 sc) x 6 (48)

34 row: 3 sc, dec, (6 sc, dec) x 5, 3 sc (42)

35 row: (dec, 5 sc) x 6 (36)

36 row: 2 sc, dec, (4 sc, dec) x 5, 2 sc (30)

We fill the head with filler. Very neatly with a muzzle, do not overwork it. Hold your mouth in

the process of stuffing so that it doesn’t twist. Do not stuff the lower lip. Stuff your neck separately

so that the head does not dangle.

37 row: (dec, 3 sc) x 6 (24)

38 row: sc, dec, (2 sc, dec) x 5, sc (18)

Fill the filler to the end. If the head falls over under the weight of the muzzle – add

filler in the back of the head.

39 row: (dec, sc) x 6 (12)

40 row: dec x 6 (6)

We cut the thread, fix it.

Ears

The marker in this part is not aligned.

1 row: 2 ch, 6 sc in the first loop (6)

2 row: inc x 6 (12)

3 row: (inc, sc) x 6 (18)

4 row: sc, inc, (2 sc, inc) x 5, sc (24)

5 row: (3 sc, inc) x 6 (30)

6 row: 2 sc, inc, (4 sc, inc) x 5, 2 sc (36)

7-11 rows (5 rows): 36 sc (36)

12 row: (dec, 16 sc) x 2 (34)

13 row: 34 sc (34)

14 row: (dec, 15 sc) x 2 (32)

15 row: 32 sc (32)

16 row: (dec, 14 sc) x 2 (30)

17 row: 30 sc (30)

18 row: (dec, 13 sc) x 2 (28)

19 row: 28 sc (28)

20 row: (dec, 12 sc) x 2 (26)

21 row: 26 sc (26)

22 row: (dec, 11 sc) x 2 (24)

23 row: 24 sc (24)

24 row: (dec, 10 sc) x 2 (22)

25 row: 22 sc (22)

26 row: (dec, 9 sc) x 2 (20)

27 row: 20 sc (20)

28 row: (dec, 8 sc) x 2 (18)

29 row: 18 sc (18)

30 row: (dec, 7 sc) x 2 (16)

31 row: 16 sc (16)

32 row: (dec, 6 sc) x 2 (14)

33 row: 14 sc (14)

We cut the thread, fix it. Fold the part

in half.

We knit the second eye in the same way. Do not stuff ears

need to.

Tail

The marker in this part is not aligned.

1 row: 2 ch, 6 sc in the first loop (6)

2 row: inc x 6 (12)

3-5 rows (3 rows): 12 sc (12)

6-14 rows (9 rows): dec, 3 sc, inc x 2, 3 sc, dec (12)

We cut the thread, fix it. Fill the tip of the tail with filler.

Nose

The marker in this part is not aligned.

IF YOU KNIT YOUR SHOE WITH THE SAME YARNES YOU KNIT THE DOG:

1 row: 5 ch, from the 2nd loop from the hook: 3 sc, 3 sc to the last loop, on the other side of the chain: 2 sc, inc (10)

2 row: inc, 2 sc, inc x 3, 2 sc, inc x 2 (16)

3 row: sc, inc, 3 sc, (inc, sc) x 2, inc, 3 sc, inc, sc, inc (22)

4 row: 22 sc (22)

We cut the thread, fix it.

FOR COMBINING HIMALAYA “KOALA” + HIMALAYA “DOLPHIN

BABY “:

1 row: 7 ch, from the 2nd loop from the hook: 5 sc, 3 sc to the last loop, on the other side of the chain: 4 sc, inc (14)

2 row: inc, 4 sc, inc x 3, 4 sc, inc x 2 (20)

3 row: sc, inc, 5 sc, (inc, sc) x 2, inc, 5 sc, inc, sc, inc (26)

4 row: 26 sc (26)

We cut the thread, fix it.

Registration

We sew all the details with sewing thread in several additions. Not sure how to sew the parts neatly?

Watch the video here.

Sew the tail. The lower point of the tail (the end of knitting) is located at the level of the lower legs,

the top point of the tail is 4-5 rows higher.

Sew on the spout by adding a little filler.

From white foamiran or felt, we cut out the whites of the eyes, slightly larger than the selected eyes in size. Eyes we sew with a strong thread, I use Iris and I embroider the eyebrows with it.

We introduce a long needle into the left corner of the mouth and withdraw into the hole for the right eye. Pick up

eye loop, insert the needle into the same hole and withdraw at the point of the left eye.

We grab the eye loop, insert the needle into the same hole and bring it to the right corner of the mouth.

Insert the needle into the left corner of the mouth (the thread goes over the canvas), put it in the place of the right eyebrow, a little

tighten so that the thread drowned in her mouth.

We embroider the eyebrows and return to the starting point. We tie the ends of the threads to several knots and

hide inside the head.

Sew on the ears in any position you like. First, sew the bottom of the eyelet, and then

the top one.

You can toned the area around the eyes, eyebrows and mouth. On fluffy yarn you can cut a little

pile in the mouth – the smile will become more pronounced.

Did you like to knit with me? Come to the forum

“Knitted life” and create in a big company

enthusiastic needlewomen!

1 Ball of Amigurumi Maxi colors: 7650 (Almond), 8990 (Black), 2856 (Deep Indigo), 8013 (Glacial), 3528 (Carmine);

Crochet hook – 5 mm;

Tapestry needle – No. 16;

Smoked safety eyes – 18 mm;

Fiber for filling.

Size: 35cm high.

EXECUTION

Legs (2x)

Start with 7650 (Almond)

1 row – 6sc inside the magic ring = 6sc

2 row – 6 inc = 12sc

3 row – 1 sc, 1 inc 6x = 18 sc

4 row – 2 sc, 1 inc 6x = 24 sc

5 to 12 row – 24 sc

13 row – (inc 3x) 6 sc (3x dec) 9 sc = 24 sc

14 row – 24 sc

15 row – (inc 3x) 6 sc (3x dec) 9 sc = 24 sc

16 row – 24 sc

17 row – 3 sc Don’t work the rest of your career.

Finish off on the first leg, on the second make 6 ch and secure on the first leg.

18 row – 24 sc on the first leg, 6 sc on the ch, 24 sc on the second leg, 6 sc on the ch = 60 sc

19 row – 60 sc

Body

20 row – 21 sc (1x inc) 28 sc (1x inc) 9 sc = 62 sc

21 row – 62 sc

22 row – 21 sc (1x inc) 30 sc (1x inc) 9 sc = 64 sc

23 row – 64 sc

24 row – 22 sc (1x inc) 30 sc (1x inc) 10 sc = 66 sc

25 to 32 row – 66 sc

33 row – 9 sc, 1 dec 6x = 60 sc

34 row – 60 sc

35 row – 8 sc, 1 dec 6x = 54 sc

36 row – 54 sc

37 row – 7 sc, 1 dec 6x = 48 sc

38 row – 48 sc

39 row – 6 sc, 1 dec 6x = 42 sc

40 row – 42 sc

41 row – 5 sc, 1 dec 6x = 36 sc

42 row – 36 sc

43 row – 4 sc, 1 dec 6x = 30 sc

44 row – 30 sc

45 row – 3 sc, 1 dec 6x = 24 sc

46 row – 24 sc

Head

47 row – İnc 24x = 48 sc

48 row – 7 sc, 1 inc 6x = 54 sc

49 row – 8 sc, 1 inc 6x = 60 sc

50 to 57 row – 60 sc

58 row – 8 sc, 1 dec 6x = 54 sc

Place the safety eyes between rows 57 and 58 with approximately 6 sc visible from a distance.

59 row – 7 sc, 1 dec 6x = 48 sc

60 row – 6 sc, 1 dec 6x = 42 sc

61 row – 5 sc, 1 dec 6x = 36 sc

62 row – 4 sc, 1 dec 6x = 30 sc

63 row – 3 sc, 1 dec 6x = 24 sc

64 row – 2 sc, 1 dec 6x = 18 sc

65 row – 1 sc, 1 dec 6x = 12 sc

66 row – 6 dec = 6sc

Finish with fake magic ring.

Snout

Start with 7650 yarn (Almond)

1 row – 7 ch

2 row – Start on the second ch 5 sc (3 sc on the last ch) Work the other side of the ch 4 sc (inc 1x on the last ch) = 14 sc

3 row – (inc 1 x) 4 sc (inc 3x) 4 sc (inc 2x) = 20 sc

4 row – (inc 2x) 5 sc (inc 2x) 1 sc (inc 2x) 5 sc (inc 2x) 1 sc = 28 sc

5 to 7 row – 28 sc

Finish and leave thread to sew.

With tapestry needle No. 16 sew the muzzle on the puppy’s face between rows 48 and 53.

With the help of the tapestry needle and thread 8990 (Black), embroider the nose in the shape of an upside down triangle, with the tip of the nose coming out of row 1 of the snout and going to row 4, then make a vertical stripe out from the tip of the nose in row 1 of the snout to row 4 in the opposite direction from the top of the nose.

Finish off.

Ear (2x)

Start with 7650 yarn (Almond)

1 row – 6 sc inside the magic ring = 6 sc

2 row – 6 inc = 12 sc

3 row – 1sc, 1 inc 6x = 18 sc

4 row – 18 sc

5 row – 2 sc, 1 inc 6x = 24 sc

6 row 24 sc

7 row – 3 sc, 1 inc 6x = 30 sc

8 to 11 row – 30 sc

12 row – 3 sc, 1 dec 6x = 24 sc

13 row – 24 sc

14 row – 2 sc, 1 dec 6x = 18 sc

15 to 20 row – 18 sc

21 row – 1 sc 1 dec 6x = 12 sc

Finish and leave thread to sew.

Fold the ears in half and with the tapestry needle nº 16 sew the ears on the head between rows 59 and 60 passing the thread over 2 sc of the ear at once and then inside the head, leaving approximately 18 sc of distance between they.

Finish off.

Arm (2x)

Start with 7650 yarn (Almond)

1 row – 6 sc inside the magic ring = 6 sc

2 row – 6 inc = 12 sc

3 row – 1sc, 1 inc = 18 sc

4 to 22 row – 18 sc

23 row – Fold the arm in half and do 1 sc over 2 sc at once, 9x = 9 sc

Finish and leave thread to sew.

With tapestry needle 16 sew them between row 41 and 42 of the body.

Leave approximately 10 visible sc between each other.

Finish off.

Tail

Start with 7650 yarn (Almond)

1 row – 5 sc inside the magic ring = 5 sc

2 row – 5 sc

3 row – 2 sc (inc 1x) 2 sc = 6 sc

4 row – 1 sc, 1 inc 3x = 9 sc

5 row – 2 sc, 1 inc 3x = 12 sc

6 row – (inc 3x) 4 sc (2x dec) = 13 sc

7 row – (1 inc, 1 sc 3x) 7 sc = 16 sc

8 row – (2 sc, 1 inc 3x) 7 sc = 19 sc

9 row – 19 sc

Finish and leave thread to sew.

With tapestry needle No. 16 sew the tail between rows 21 and 26 of the body on the back, taking care that the curve of the tail is facing upwards.

Finish off.

Vest

Start with 2856 thread (Deep indigo)

Work in linear crochet, with each new row make 1 tea and turn the work.

1 row – 59 ch

2 row – Start on Monday ch 58 sc

3 row – 58 sc

Switch to wire 8013 (Glacial Light Gray)

4 and 5 row – 58 sc

Change to wire 2856 (Deep Anil)

6 and 7 row – 58 sc

Switch to wire 8013 (Glacial Light Gray)

8 and 9 row – 59 sc

Vest part 1.

Start with yarn 2856 (Deep Anil)

10 row – 16 sc Don’t work the rest of the row

11 row – Do not work the first sc of the row 14 sc Do not work the last sc of the row

Switch to wire 8013 (Glacial Light Gray)

12 row – 14 sc

13 row – Do not work the first sc of the row 12 sc Do not work the last sc of the row

Change to wire 2856 (Deep Anil)

14 row – 12 sc

15 row – Do not work the first sc of the row 10 sc Do not work the last sc of the row

Switch to wire 8013 (Glacial Light Gray)

16 row – 11 sc

17 row – Do not work the first sc of each row 8 sc Do not work the last sc of the row

Change to wire 2856 (Deep Anil)

18 and 19 row – 8 sc

Finish off.

Vest part 2.

Start with yarn 2856 (Deep Anil)

From the last sc of row 10 of Part 1 of the vest. and attach the wire

10 row – 26 sc Don’t work the rest of the row

11 row – Do not work the first sc of the row 24 sc Do not work the last sc of the row

Switch to wire 8013 (Glacial Light Gray)

12 row – 24 sc

13 row – Do not work the first sc of the row 22 sc Do not work the last sc of the row

Change to wire 2856 (Deep Anil)

14 row – 22 sc

15 row – Do not work the first sc of the row 20 sc Do not work the last sc of the row

Switch to wire 8013 (Glacial Light Gray)

16 row – 20 sc

17 row – Don’t work the first sc in the row 18 sc Don’t work the last sc in the row

Change to wire 2856 (Deep Anil)

18 and 19 row – 18 sc

Finish off.

Vest part 3.

Start with yarn 2856 (Deep Anil)

From the last sc of row 10 of Part 2 of the vest. and attach the wire.

10 row – 16 sc Don’t work the rest of the row

11 row – Do not work the first sc of the row 14 sc Do not work the last sc of the row

Switch to wire 8013 (Glacial Light Gray)

12 row – 14 sc

13 row – Do not work the first sc of the row 12 sc Do not work the last sc of the row

Change to wire 2856 (Deep Anil)

14 row – 12 sc

15 row – Do not work the first sc of the row 10 sc Do not work the last sc of the row

Switch to wire 8013 (Glacial Light Gray)

16 row – 11 sc

17 row – Do not work the first sc of each row 8 sc Do not work the last sc of the row

Change to wire 2856 (Deep Anil)

18 and 19 row – 8 sc

Finish off.

With the tapestry needle and the 2856 thread (Deep Anil), join part 1 to part 2 of the vest by sewing the last 3 sc of part 1 together with the first 3 sc of part 2 of the vest, then sew the last 3 sc of part 2 together with the first 3 sc of part 2, thus forming the front of the vest and the hole in the arms.

Finish off.

With the wire 3528 (Carmine), make 95 ch and end, pass the chains in zigzag in front of the vest so that they close it in the body of the bear.

Cap Top

Start with wire 8013 (Light Gray Glacial)

1 row – 6 sc inside the magic ring = 6 sc

2 row – 6 inc = 12 sc

3 row – 1sc, 1 inc 6x = 18 sc

4 row – 2 sc, 1 inc 6x = 24 sc

5 row – 3 sc, 1 inc 6x = 30 sc

6 row – 4 sc, 1 inc 6x = 36 sc

7 row – 5 sc, 1 inc 6x = 42 sc

8 row – 6 sc, 1 inc 6x = 48 sc

Finish off.

Cap

Start with 3528 (Carmine)

1 row – Make 42 ch

2 row – Attach the first tea to the last. 42 sc

3 row – 42 sc

Switch to wire 8013 (Glacial Light Gray)

4 row – 20 sc (1x triple inc) 21 sc = 44 sc

5 row – 21 sc (1x triple inc) 22 sc = 46 sc

6 row – 22 sc (1x triple inc) 23 sc = 48 sc

7 row – Work on 1 sc of the cap and 1 sc on the top of the cap at the same time. 23 sc (1x inc) 24 sc = 49 sc

Finish off.

With the wire 3528 (Carmine), finish the cap by making 1 sl st. in each handle of the initial ch that have not been worked.

Finish off.

Cap of the Cap

Start with yarn 2856 (Deep Anil)

1 row – 6 sc inside the magic ring = 6 sc

2 row – 6 inc = 12 sc

3 row – 1sc, 1 inc 6x = 18 sc

4 row – 2 sc, 1 inc 6x = 24 sc

5 row – 3 sc, 1 inc 6x = 30 sc

6 row – Fold the piece in half and make 1 sc over 2 sc at a time giving the piece a half moon shape. = 15 sc

Finish and leave thread to sew.

With the tapestry needle nº16 sew the Cap of the Cap in the first row of the Cap so that the half moon is facing forward as well as the triple inc of the Cap, sew the Tab so that it makes the slabs visible. finish.

Finish off.

Yarn art jeans:

White color (01

Black color (28)

Brown color (70)

Black safety eyes 8mm

Crochet hook 2,5mm

Finished size: 14-16cm

ABBREVIATIONS/ US TERMS:

(MR) magic ring

sc single crochet

inc increase

dec single crochet decrease (sc next 2 stitches together)

ch chain stitch

hdc half double crochet

sl slip sticth

st/sts sticth/stiches

rnds rnds

*…* repeat instuctions x times

() number of sticth of each row

BLO back loop only

1. HEAD:

Use white color

1 6sc (MR) (6)

2 6inc (12)

3 (sc, inc)*6 (18)

4 sc, inc, (2sc, inc)*5, sc (24)

5 (3sc, inc)*6 (30)

6 2sc, inc, (4sc, inc)*5, 2sc (36)

7 (5sc, inc)*3, [Black 4sc], sc, inc, (5sc, inc)*2 (42)

8 3sc, inc, (6sc, inc)*2, 2sc, [Black 4sc, inc]; (6sc, inc)*2, 3sc (48)

9 (7sc, inc)*2, 3sc; [Black 2sc]; 2sc; [inc (1 White, 1Black), 4sc]; 3sc, inc,

(7sc, inc)*2 (54)

10 20sc, [Black 4sc]; 3sc; [Black 3sc]; 24sc (54)

11 20sc, [Black 4sc]; 30sc (54)

12 (8sc, inc)*2, 3sc; [Black 2sc]; 3sc, inc, (8sc, inc)*3 (60)

13 16sc, [Black 3sc]; 41sc (60)

14 15sc, [Black 5sc]; 40sc (60)

15 (9sc, inc), 4sc; [Black 5sc, inc]; (9sc, inc)*4 (66)

16-18 15sc; [Black 7sc]; 44sc (3 rounds) (66)

19 (10sc, inc), 5sc; [Black 5sc, inc (1Black, 1 White)]; (10sc, inc)*4 (72)

20 72sc (72)

Place the safety eyes (8mm) between the 16th – 17th round. The distance between

2 eyes is 12 stitches.

21 5sc, dec, (10sc, dec)*5, 5sc (66)

22 (9sc, dec)*6 (60)

23 (3sc, dec)*12 (48)

24 (4sc, dec)*8 (40)

25 (8sc, dec)*4 (36)

26 36sc (36)

27 BLO (sc, dec)*12 (24)

28 (2sc, dec)*6 (18)

29 (sc, dec)*6 (12)

30 dec*6 (6)

Break the yarn and fasten off your work.

2. EARS:

Make 1 Black, 1White

1 6sc (MR) (6)

2 (sc, inc)*3 (9)

3 (2sc, inc)*3 (12)

4-5 12sc (2 rounds) (12)

6 (4sc, inc)*3 (15)

7 15sc (15)

8 (4sc, inc)*3 (18)

9 18sc (18)

10 (4sc, dec)*3 (15)

11 (3sc, dec)*3 (12)

12 12sc (12)

13 Press both layers of the ears (6)

Cut yarn leaving long yarntail for sewing

3. HANDS: (make 2)

Left hand

Use white color

1 6sc (MR) (6)

2 6inc (12)

3 12sc (12)

4 sc; [Black 2sc]; 9sc (12)

5 [Black 4sc]; 8sc (12)

6 sc; [Black 2sc]; 9sc (12)

7-16 12sc (10 rounds) (12)

Don’t stuff. Continue crochet 1sc and press both

layers of the arms 6sc.

Right hand

Use white color

1 6sc (MR) (6)

2 6inc (12)

3-5 12sc (3 rounds) (12)

6-7 [Black 2sc]; 10sc (2 rounds) (12)

8-10 12sc (3 rounds) (12)

11 sc; [Black 3sc]; 8sc (12)

12-13 [Black 5sc], 7sc (2 rounds) (12)

14 sc; [Black 3sc], 8sc (12)

15-16 12sc (2 rounds) (12)

Don’t stuff. Continue crochet 1sc and press both

layers of the arms 6sc.

4. LEGS: (make 2)

Use white color

1 6sc (MR) (6)

2 6inc (12)

3 BLO 12sc (12)

4 12sc (12)

5. BODY:

From the second leg (right leg) continue crochet 9 chain stitchs then conect to the first one (left

leg)

5 9ch, sl (on another leg), 12sc, 9sc (on the chain stitchs), sl, 12sc, 9sc (on

the chain stitchs) (42)

6-7 42sc (2 rounds) (42)

8 3sc, inc, (6sc, inc)*5, 3sc (48)

9 (7sc, inc), 7sc; [inc (1 White, 1Black), Black 2sc]; 5sc, inc, (7sc, inc)*3 (54)

10 4sc, inc, 8sc, inc, 2sc; [Black 5sc]; sc, inc, (8sc, inc)*2, 8sc;

[inc (1 White, 1Black), Black sc]; 3sc (60)

11 18sc; [Black 5sc]; 31sc; [Black 4sc]; 2sc (60)

12 19sc; [Black 3sc]; 23sc; [Black 2sc]; 8sc; [Black 2sc]; 3sc (60)

13 32sc; [Black 4sc]; 9sc; [Black 2sc]; 13sc (60)

14-15 14sc; [Black 2sc]; 15sc; [Black 6sc]; 23sc (2 rounds) (60)

16 31sc; [Black 6sc]; 23sc (60)

17 5sc; [Black 3sc]; 14sc; [Black 3sc]; 7sc, [Black 4sc]; 14sc; [Black 3sc]; 7sc (60)

18-19 4sc; [Black 4sc]; 12sc; [Black 5sc]; 23sc, [Black 5sc]; 6sc (2 rounds) (60)

20 4sc; [Black 5sc]; 13sc, [Black 3sc]; 24sc, [Black 5sc]; 6sc (60)

21 4sc, dec; [Black 2sc]; 6sc, dec, (8sc, dec)*3, 4sc; [Black 3sc]; sc, dec, 4sc (54)

22-23 29sc; [Black 2sc]; 23sc (2 rounds) (54)

24 54sc (54)

25 7sc, dec, sc; [Black 2sc]; 4sc, dec, (7sc, dec)*4 (48)

26 9sc; [Black 2sc]; 38sc (48)

27 48sc (48)

28 12sc; [Black 2sc]; 34sc (48)

29 dec, 6sc, dec, sc; [Black 4sc]; sc, dec, (6sc, dec)*3, 6sc (42)

30 10sc; [Black 2sc]; 30sc (42)

31 4sc, 6sc on the body and the arm at the same time, 15sc;, 6sc on the body and

the arm at the same time, 11sc (42)

32 (5sc, dec)*6 (36)

6. TAIL:

9 | P a g e

1 6sc (MR) (6)

2 (sc, inc)*3 (9)

3-7 9sc (5 rounds) (9)

7. NECKLACE:

Crochet 52 chain stitchs, turn, skip 2 stitchs from hook, crochet 50hdc

You can crochet more or less chain stitch to get about 16cm long.

Well, my friend. Our little has come to the end. I hope you are happy with the result. And you will

comback to get new emotions.

I will be happy if you tag your work made with ours pattern

Terms Used:

slst – slip stitch

ch – chain

sc – single crochet

inc – increase

dec – decrease

Dog Chocolate

Materials:

For basic knitting mohair dark brown

and Karachaevskaya wool mixture of chocolate color,

stacked together.

Mohair for the ears. Lotus Grass Treych or Softi for

paws and tail tip.

Hook number 3,5

Black Beaded Pehorca for nose

Hook number 2.5 for knitting the nose.

Head:

We start to knit from the muzzle:

1 row: 6 sc into magic ring

2 row: 2 sc in each loop of the previous row (12 loops)

3 row: * 1 sc, inc * – repeat 6 times (18 loops)

4th row: * 2 sc, inc * 6 times (24 loops)

5 row: * 3 sc, inc * 6 times (30 loops)

6 row: * 4 sc, inc * 6 times (36 loops)

7-10 rows: 4 rows of sc in each loop (36 loops)

11 row: * 4 sc, dec * 6 times (30 loops)

12 row: sc in each loop (30 loops)

13 row: * 3 sc, dec * – 6 times (24 loops)

14 row: sc in each loop (24 loops)

15 row: * 4 sc, dec * – 4 times (20 loops)

16 row: sc in each loop (20 loops)

17 row: * 4 sc, inc * 4 times (24 loops)

18 row: * 3 sc, inc * 6 times (30 loops)

19-22 rows: 4 rows sc in each loop (30 loops)

23 row: * 3 sc, dec * – 6 times (24 loops)

24 row: * 2 sc, dec * – 6 times (18 loops)

We fill the head with filler.

25 row: * 1 sc, dec * – 6 times (12 loops)

26 row: * dec * – 6 times (6 loops)

Fasten the thread, tighten the loops, hide the remaining end.

Nose:

1 row: 4 ch

2 row: on one side of the chain: 2 sc, 3 sc. in the outer loop; turn and

we knit on the other side of the chain: 1 sc, inc (8 loops)

3 row: inc, 1 sc., 3 inc, 1 sc., 2 inc (14 loops)

4th row: 1 sc, inc, 1 sc, (1 sc, inc) * 3 times, 1 sc, (1 sc, inc) * 2 times (20 loops)

5 row: 2 sc, inc, 1 sc, (2 sc, inc) * 3 times, 1 sc, (2 sc, inc) * 2 times (26 loops)

6-8 rows: 3 rows sc in each loop (26 loops)

Fasten the thread, leave the long end, fill with filler and sew to the muzzle.

Ears (1 option):

From thin mohair

1 row: 6 sc in amigurumi ring (6 loops)

2 row: 2 sc in each loop of the previous row (12 loops)

3 row: sc in each loop (12 loops)

4th row: * 1 sc, inc * – 6 times (18 loops)

5-14 rows: 10 sc rows in each loop (18 loops)

15 row: * 4 sc, dec * – 3 times (15 loops)

16-17 rows: sc in each loop (15 loops)

18 row: * 3 sc, dec * – 3 times (12 loops)

19-20 rows: 12 sc

Fasten the thread, leave a long end for sewing

to the head

Ears (2 option):

From thick wool

1 row: 12 ch

2 row: on one side of the chain: 9 sc, 3 sc to the extreme

loop, turn and knit on the other side of the chain:

8 sc, inc (22 loops)

3 row: inc, 4 sc, 4 HDC, 3 inc of HDC, 4 HDC,

4 sc, 2 inc (28 loops)

4 row: 1 sc, inc, 4 sc, 4 HDC, (1 HDC, inc of HDC)

* 3 times, 4 HDC, 4 sc, (1 sc, inc) * 2 times (34 loops)

Fasten the thread, leave a long end for sewing to the head.

• HDC – half crochet.

Body:

1 row: 6 sc into magic ring

2 row: 2 sc in each loop of the previous row (12 loops)

3 row: * 1 sc, inc * – repeat 6 times (18 loops)

4th row: * 2 sc, inc * 6 times (24 loops)

5 row: * 3 sc, inc * 6 times (30 loops)

6 row: sc in each loop (30 loops)

7 row: (1 sc, inc) * 6, 18 sc (36 loops)

8 row: sc in each loop (36 loops)

9 row: (2 sc, inc) * 6, 18 sc (42 loops)

10-13 rows: 4 sc rows in each loop (42 loops)

14 row: (2 sc, dec) * 6, 18 sc (36 loops)

15 row: * 4 sc, dec * – 6 times (30 loops)

16 row: sc in each loop (30 loops)

17 row: * 3 sc, dec * – 6 times (24 loops)

18-20 rows: 3 sc rows in each loop (18 loops)

21 rows: sc in each loop (18 loops)

22 row: * 1 sc, dec * – 6 times (12 loops)

Fill the body with filler, fasten the thread,

leave a long end for sewing

Tail:

We start with white yarn:

1 row: 4 sc into magic ring

2 row: inc, 3 sc (5 loops)

3 row: 5 sc

4 row: inc, 4 sc (6 loops)

5 row: 6 sc

6 row: inc, 5 sc (7 loops)

Change the thread to chocolate:

7-11 rows: dec, 2 sc, inc, 2 sc (7 loops)

12 row: 3 sc, inc, 3 sc (8 loops)

13 row: 4 sc, inc, 3 sc (9 loops)

14 row: 4 sc, inc, 4 sc (10 loops)

Fill the tail with filler, fasten the thread, leave the end for sewing.

Upper paws:

We start with white yarn:

1 row: 6 sc into magic ring

2 row: 2 sc in each loop of the previous row (12 loops)

3 row: * 1 sc, inc * – repeat 6 times (18 loops)

4 row: 18 sc

5 row: 8 sc, dec, 8 sc (17 loops)

6 row: 6 sc, dec, 1 sc, dec, 6 sc (15 loops)

7 row: (1 sc, dec) * repeat 5 times

8 row: 10 sc

Change thread to brown:

9-18 rows: sc in each loop (10 loops)

Fill the paws with filler.

19 row: 5 dec (5 loops)

Fasten the thread, tighten the loops, leave a long end for sewing.

Lower paws:

We start with white yarn:

1 row: 6 sc into magic ring

2 row: 2 sc in each loop of the previous row (12 loops)

3 row: * 1 sc, inc * – repeat 6 times (18 loops)

4 row: 18 sc

5 row: 7 sc, dec, 7 sc, dec (16 loops)

6 row: 6 sc, dec, 6 sc, dec (14 loops)

7 row: 6 sc, inc, 6 sc, inc (14 loops)

8 row: 7 sc, inc, 7 sc, inc (18 loops)

9 row: 18 sc

Turn knit e and knit the heel to the rotary rows without a lifting loop

(5 sc, dec, turn) * repeat 3 times. For dec 1 we take the loop from the heel, the second

from the side wall of the heel

10 row: 5 sc on the heel, dec on the side wall, 7 sc, dec on the side wall of the heel

(14 loops)

11-12 rows: 14 sc

Change the thread to brown:

13-14 rows: 14 sc

15 row: dec, 5 sc, dec, 5 sc (12 loops)

16 row: 12 sc

We turn the knitting and knit the knee in rotary rows without lifting loops.

Make sure that the knee is exactly on the back side opposite the heel

(6 sc, dec, turn) * repeat 3 times

17 row: 6 sc on the knee, 2 sc on the side wall, 6 sc, 2 sc on the side wall

18-20 rows: 14 sc

21 row: dec, 5 sc, dec, 5 sc (12 loops)

Fill the paws with filler.

22 row: 6 dec (6 loops)

Fasten the thread, tighten the loops, leave a long end for sewing.